Service manual

I BRAVILOR@
BONA MAT
ifl
MAINTENANCE BY AUTHORIZED USERS
7.
During use calcification takes place in the
machine. The machine is provided with a wamlng
system that indicates when the machine must be
descaled.
r\
Fig. 13 Descaling signal
When this signal appears on the display the
machine needs descaling.
~ WABHJ/:KJ , !::!. Do not ignore this message, otherwise the
. guarantee will be no longer valid!
7.1 Descaler
[;1\J~~llng wear glove. end feciel
. protection and do not leave the machine
during the process.
TIE
- Make sure there is a large receiving bin (min.
capacity 7 I) for the liquid that is drained.
Remove the drip-tray (8.).
. Remove the drip-tray (8.).
. Open the door (2.).
. Lift the cover (1.).
. Remove all ingredient containers (17.) fror
machine.
. Press the programming key (18.2).
. Press two times the [Enter] key (4.12).
I DE - If you do not want to descale, within
10 seconds press the key (4.13) to stop
the descaling programme.
. Press the setting key (4.11).
1.0 Bravilor Ltd.
14
version
Fig. 14 Descaling programme
The descaling symbol appears on the display.
The figure in the upper right corner indicates the
number of liters of water that has been used
since the last descaling process.
WAI1NlIm.
~ The water coming out of the drain hose can
be very hot.
. Pull the drain hose (21.) about 5 cm out of the
machine.
. Place a receiving bin with a capacity of at least
7 litres under the drain hose.
DE
- Slide the machine to the rim of the blade it
stands on, so that a receiving bin can be
placed under the drain hose.
. Remove the plug from the drain hose and let
the water flow into the receiving bin.
. Place the plug on the drain hose again.
. Place the receiving bin under both outlets (5.
and 6.).
DE
I- If the descaling has started in the meantime,
then push longer than 10 second. on the
setting key (4.13) to stop the descaling
programme.
~
containers (17.) from the
CCopyright Bravilor Bonamet B.V.