Unit installation

6-11

043: Set CW 2-Tone Frequencies for a Selected Port

This command allows you to set up the CW tone frequencies used by the CW system.

<043> p aaaa bbbb

Parameters:

- 043 is the default command name.

- P is the selected port (1..8)

- AAAA is the first tone frequency (0000..9999) Hz

- BBBB is the second tone frequency (0000..9999) Hz

Default:

Tone 1 is set to 1064 Hz.

Tone 2 is set to 0000

Alternate Entries:

If a single tone CW frequency chord is wanted, only enter 1 frequency

- 043 P AAAA D or unkey or <Enter>

If a 2 tone CW frequency is chord wanted, only enter 2 frequencies

- 043 P AAAA BBBB D or unkey or <Enter>