Unit installation

8-18

Macro 400 is used to speak "Autopatch Busy" when you try to use the patch when it is already in

use. It is automatically programmed when the controller is reinitialized. You can delete it and

program your own autopatch busy message if you wish.

Macro Definition

400 Called when the Autopatch is Busy

Macro 401 is used to speak "Autopatch" before the phone number is read back and dialed. It is

automatically programmed when you set up the autopatch with Command 110. You can delete it

and program your own message if you wish, but be sure that you recall the pre-programmed

message first and understand what it does (it may do some other things depending on the number

readback mode). You can also change the number of pauses that are spoken after the word

"Autopatch" to change the delay before the number readback begins. Also see macro 411.

Macro Definition

401 Called before Autopatch number is read-back

Macro 402 is used to speak pauses after the number is read back. It is automatically programmed

when you set up the autopatch with Command 110. You can change it if you wish, but be sure that

you recall the pre-programmed macro first and understand what it does. You can change the

number of pauses that are spoken to change the time that you can wait after the number is read

back and still be able to kerchunk to make it dial/not dial (depending on the number readback

mode).

Macro Definition

402 Called after Autopatch number is read-back

Macro 403 is an autopatch macro that is used for number readback mode 2.

Macro Definition

403 Internal Autopatch Macro