Unit installation

13-24

136: Set up Reverse Autopatch Ring

This command allows the user to set up the over the air ringing tone and length.

<136> Recall ring length and frequencies

<136> gg dd Set number of rings before give up

when using command 132

<136> xxx yyyy zzzz Set ring length and frequencies

Parameters:

- 136 is the default command name.

- GG is the maximum number of times the controller will generate a ring tone when

command 132 is used to do a general call-out. Default is 5 rings.

- DD is the maximum number of times the controller will generate a ring tone at the end of

the directed reverse patch call-out sequence. See command 132 for more

details. The default is 3 rings.

- XXX is the length of the ring tone in 10ms increments (100 = 1 second)

- YYYY is the Frequency of the first ring tone

- ZZZZ (optional) is the Frequency of the second ring tone

Defaults:

Ring tone length defaults to 2 Second

Ring tone frequencies default to 0440 Hz and 0480 Hz.

Example:

To set the ring back to the default: 136 200 0440 0480

Notes:

Do not make the length of the ring tone too long. The controller will stack up tone requests

and could still be ringing over the air after the phone has answered if the length of the tone is longer

than the delay between rings from your phone company.