Unit installation

14-15

143: Set Offset for RBI-1 or RLC-ICM

This command allows you change the offset on the radio connected to the Doug Hall RBI-1. The

offset is always specified as one digit, 0 to 3. There are two different common definitions of what

digit corresponds with what offset. They are shown in the table below. The RLC-3 supports both.

You can select which format you want to use with Command 144.

<143> o

Parameters:

- 143 is the default command name.

- O is the new offset

'O'ffset Format 1 Format 2

0 Minus Minus 20 (1200 only)

1 Plus Minus

2 Simplex Simplex

3 Minus 20 (1200 only) Plus

Note:

You can recall the current band unit, frequency, and offset with Command 149.