Unit installation

15-16

199: Enter HF Command (w/o being in HF mode)

This command allows you to control an HF radio without switching into HF mode with command

198. This may be useful when you just want to change just one thing or if you want to write a

macro that will do a lot of things at once. After entering the command name, you should enter

your HF prefix digit (if you have one, see command 195, then any other digits you would enter if

you were in HF mode (1 for receive, 14*25 to change frequency, etc).

199 p h..h

Parameters:

- p = your HF command prefix digit if you have one (see command 195)

- h..h is a command you would normally enter while in HF mode (they are described after

command 198)

Notes:

It is possible to write a macro that uses command 199 to do several things, then execute

that macro from HF mode using the keypad digit 4.