Unit installation

18-6

186: Set up User Password

This command allows the system manager to set-up a user's password. Once the password is set,

the user must then enter the correct sequence to access commands higher than level 0.

<186> uuu Recall a user’s password information

<186> uuu e Enable/Disable a selected user

<186> uuu e l Enable/Disable a selected user and set the user level

<186> uuu e l t p..p All of the above plus enter password information

Parameters:

UUU - user number

E - 1 enable / 0 disable

L - user level

T - password type (0 = fixed. 1 or more is number of challenge digits)

P..P - your password (8 digits max)

Notes:

- Can enable or disable a user by only entering through E.

- If choose a password type of 0 but don't enter a password, you will be able to log in by just

entering the name of command 187 followed by your user number (password method #1).