Unit installation

2-7

003,004: Recall a Port's Connections

This command allows you to find out where port X's receiver or transmitter is connected.

<003> x Interrogate a Receiver

<004> x Interrogate a Transmitter

Parameters:

- 003 is the default command name. This command finds what transmitters are connected

to receiver 'X' is routed to.

- X is the receiver to recall the connections to

- 004 is the default command name. This command finds what receivers are routed to

transmitter 'X'

- X is the transmitter to recall the connections to

Default:

- Port 1 defaults as a repeater

- Ports 2..8 default to links

Example 1:

Port 1 is connected to ports 2 4 6 8

<003> 1 D or unkey or <Enter>

Response:

Voice Response "1 Connect 2 4 6 8"

Example 2:

Ports 1,3,5,7 are connected to port 2

<004> 2 D or unkey or <Enter>

Response:

Voice response "2 Connect 1 3 5 7"