Unit installation

4-4

Transmitter Hang Timer:

This timer holds the transmitter PTT active after a connected receiver goes inactive. If a courtesy

beep is sent, this is the minimum time after the courtesy beep before the PTT drops. This timer

only has an effect when a connected receiver has been active since the PTT went active; otherwise

this timer is ignored and the mini-hang timer (timer 060..067) is the only thing that will cause a

delay. You must set the mini-hang timer shorter than this timer or this timer won't have any effect,

as the actual delay is the longer of the two timers.

- This timer is programmed in 10mS increments from 0-9999 (0 is OK).

Timer Number Definition Defaults

016 Hang Timer, Transmitter 1 2 sec (200)

017 Hang Timer, Transmitter 2 "

018 Hang Timer, Transmitter 3 "

019 Hang Timer, Transmitter 4 "

020 Hang Timer, Transmitter 5 "

021 Hang Timer, Transmitter 6 "

022 Hang Timer, Transmitter 7 "

023 Hang Timer, Transmitter 8 "