Unit installation

4-8

Transmitter Mini-Hang Timer:

This timer holds the transmitter PTT active for a minimum time after any keying source (connected

receiver, synthesized voice, tone, cw, DVR message, etc) goes inactive. It can be used to keep the

transmitter from dropping out immediately after a message. To control the hang time after a

connected receiver unkeys, you can also use the normal hang timers (016..023); the actual hang

time will be the longer of the two.

- This timer is programmed in 10mS increments from 000-9999

Timer Number Definition Defaults

060 Mini-Hang Timer, Transmitter 1 1/2 sec (50)

061 Mini-Hang Timer, Transmitter 2 "

062 Mini-Hang Timer, Transmitter 3 "

063 Mini-Hang Timer, Transmitter 4 "

064 Mini-Hang Timer, Transmitter 5 "

065 Mini-Hang Timer, Transmitter 6 "

066 Mini-Hang Timer, Transmitter 7 "

067 Mini-Hang Timer, Transmitter 8 "