Unit installation

4-17

Ping Radio Cards Timer:

This timer determines how often the motherboard checks on the radio cards to see if they are

responding normally. It also double-checks that the PTT is turned on or off as it should be. This

timer is also used to make sure the voice synthesizer is working normally. You should not change

the value of this timer.

- This timer is programmed in 1 second increments from 001-9999

Timer Number Description Defaults

173 Ping Radio Cards Timer 10 sec. (010)

DVR Start Recording Timer:

This timer sets the maximum time allowed after entering a command to start recording a DVR

message and when you actually key up to start the recording. If you wait longer than this timer, it

will not record. This is so a command to record a DVR message can not be executed and end up

recording someone that keys up an hour later. If you start the recording with a DTMF digit, this

timer will not have any effect.

- This timer is programmed in 1 second increments from 001-9999

Timer Number Description Defaults

174 DVR Start Recording Timer 10 Sec. (010)

DVR Record Length Limit Timer:

This timer sets the maximum length of message that can be recorded using the DVR. If you try to

record a longer message, it will be truncated at this length. Of course, if you unkey, press a DTMF

digit or the DVR runs out of memory before this time is up, it will quit recording sooner. You can

set this timer to be relatively long while setting up the DVR, then shorter to keep people from

leaving very long voice mail messages for people.

- This timer is programmed in 1 second increments from 001-9999

- This timer defaults to 030

Timer Number Description Defaults

175 DVR Record Length Limit 30 sec. (030)