Unit installation

RLC-3 V1.80 Copyright © 1998 Link Communications Inc. 9/17/98
Chapter 13: Autopatch Routines .............................................13-1
Configuring the Autopatch: .............................................13-1
Autopatch Up Commands: .............................................13-1
Using '*' for the Autopatch Up Command: .................................13-1
Hanging Up: ........................................................13-2
Connected Ports: ....................................................13-2
Predial Digits: .......................................................13-2
The Autodialer: ......................................................13-2
Limiting Call Length: .................................................13-3
How the Dialing Tables Work: ..........................................13-3
Other Commands that Affect the Autopatch: ................................13-5
110: Configure the Autopatch ..........................................13-6
111: Manual Off Hook ................................................13-8
112: Normal Forward Dial .............................................13-8
113: Forward Dial with no Long Distance Checking .........................13-9
137: Autodial Only ..................................................13-9
129: Repeat Dial (redial the last number dialed) ............................13-10
114: Hang up the Autopatch ..........................................13-11
115: Possibly Hang up the Autopatch ....................................13-11
116: Set / Recall the Predial Digits and Timing .............................13-12
119: Set Allowed Numbers Table Slot ...................................13-13
120: Recall Allowed Numbers Table Slot .................................13-13
121: Set Nuisance Numbers Table Slot ..................................13-14
122: Recall Nuisance Numbers Table Slot ................................13-14
123: Test Dialing Tables .............................................13-15
124: Set Autodial Slot ...............................................13-15
125: Recall Autodial Slot .............................................13-16
126: Send Predial Digits / Callsign for Autodial Slot? ........................13-16
127: Enable/Disable an Autodial Slot ....................................13-17
128: Set/Recall Patch Audio Options for a TX .............................13-18
133: Set up Reverse Patch ............................................13-20
134: Access Reverse Patch Control Mode ................................13-22
135: Answer Reverse Patch ...........................................13-22
132: Start Reverse Patch Call-Out ......................................13-23
136: Set up Reverse Autopatch Ring ....................................13-24
192: Set/Recall Call-Out Options .......................................13-25
Chapter 14: Doug Hall RBI-1 and RLC-ICM Routines ...........................14-1
What the RBI-1 is: ...................................................14-1
What the RLC-ICM is: ................................................14-1
Interfacing and Setup: .................................................14-1
Using the RBI-1 or RLC-ICM: ..........................................14-2
Building the RBI-1/RLC-ICM Cable ..........................14-5
139: Set Up the RLC-Icom Interface .....................................14-8
RLC-ICM Internal Operation Test Points .................................14-11
140: Set Port for RBI-1 or RLC-ICM ...................................14-12
141: Set Band Unit for RBI-1 or RLC-ICM ...............................14-13
142: Set Frequency (and Offset) for RBI-1 or RLC-ICM ..................... 14-14