Installation & Assembly

ALL-PURPOSE CHROME SWIVEL STOOL
We warrant to the original consumer purchaser (“Purchaser”) of the All-Purpose
Chrome Swivel Stool (“Product”) that each Product shall be free from defects in
workmanship and materials for a period of 90 days from the date of original purchase.
Our obligation under this warranty shall be limited to repair or replacement of, or
adequate compensation for, the Product, at the option of us, during the warranty period.
Our liability shall not extend beyond repair or replacement, or the cost equiva-lent
thereto.
LIMITATION OF REMEDIES AND LIABILITY
We shall not be liable for any incidental or consequential damages for breach of any
express or implied warranty on its Product. Except to the extent prohibited by appli-
cable law, any implied warranty or merchantability or fitness for a particular purpose on
this Product shall be limited to the duration of the above warranty. Neither us nor
anyone else who has been involved in the creation, production, or delivery of the
Product shall be liable for damages of any type, including but not limited to any lost
profits, lost savings, loss of anticipated benefits, or other incidental or consequential
damages which may arise out of the purchase, use, or inability to use the Product,
whether arising out of contract, negligence, strict tort, or under any warranty, or other-
wise, even if you have been advised of the possibility of such damage or any other
claim by any other party. Our liability for any breach of warranty shall be limited to repair
or replacement of the defective part or parts as described above. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. The above warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
LIMITED WARRANTY
M
J
I
A
L
R
S
H
B
J
I
G
G
E
F
D
C
G
A
1. Put A on top of B, and fasten with
G from the top and J and I from the
bottom.
2. Once Legs (A + B) are secure,
turn the legs upside down, and
hammer in the Feet (C). Screw in
Feet Levelers (D) into the Feet (C).
3. Turn the legs right side up. Place
the Large Ring (E) around A+B, and
slide into place. Match up the holes,
and screw with G on the inside and H
on the outside. Tighten.
4. Place Small Ring (F) on the inside
of the legs. You may need to tilt ot fit
into space. Match F with the holes
on the legs, and screw in with G.
Tighten.
5. Take out the baseplate (K), and
turn the top so that the top and
bottom are at a 45 degree angle (see
picture ). Make sure to put K on the
legs first. Insert M between K and
the legs. Screw with L from the top,
and J and I from the bottom.
6. Screw the Rim (O) to the Seat (N)
with P. Make sure the Ring is
centered to the Seat.
7. Lay the seat on the ground, and
attach the legs while stool is upside
down. Screw the Base Plate (K) to
the Seat (N) with (Q).
8. Ensure all screws are tightened.
Step 1
Step 2
Step 6
Step 5
Step 7
Step 4
Step 3
O
P
N
Q