User's Manual

LIMITATION OF REMEDIES AND LIABILITY
LIMITED WARRANTY
M
J
I
A
L
R
S
H
B
J
I
G
G
E
F
D
C
G
A
1. Put A on top of B, and fasten with
G from the top and J and I from the
bottom.
2. Once Legs (A + B) are secure,
turn the legs upside down, and
hammer in the Feet (C). Screw in
Feet Levelers (D) into the Feet (C).
3. Turn the legs right side up. Place
the Large Ring (E) around A+B, and
slide into place. Match up the holes,
and screw with G on the inside and H
on the outside. Tighten.
4. Place Small Ring (F) on the inside
of the legs. You may need to tilt ot fit
into space. Match F with the holes
on the legs, and screw in with G.
Tighten.
5. Take out the baseplate (K), and
turn the top so that the top and
bottom are at a 45 degree angle (see
picture ). Make sure to put K on the
legs first. Insert M between K and
the legs. Screw with L from the top,
and J and I from the bottom.
6. Screw the Rim (O) to the Seat (N)
with P. Make sure the Ring is
centered to the Seat.
7. Lay the seat on the ground, and
attach the legs while stool is upside
down. Screw the Base Plate (K) to
the Seat (N) with (Q).
8. Ensure all screws are tightened.
Step 1
Step 2
Step 6
Step 5
Step 7
Step 4
Step 3
O
P
N
Q
CHROME SWIVEL STOOL