Installation Instructions

1
Installation Instructions for
1.0
Pendant
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
Place a silicone pad onto the socket followed by outer shade, then place another silicone pad onto the socket followed by
the spun, inner shade, and spacer (in that order), and secure them in place by screwing the shade collar nut onto the
socket using the shade tool.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
1
2
1A
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
3
LAMP
OUTER SHADE
SOCKET
COLLAR NUT
1
3
2
SPACER
INNER SHADE
SHADE TOOL
SILICONE PAD
SPUN
SILICONE PAD
1 Light Mini-Pendant