Instruction for assembly Dresser 430 830 1582
Table 1- Complete set No. of Quantity, Name of a detail Size, mm poses piece.
23 18 22 21 21 22 4 2 15 5 3 8 13 1 5 17 7 16 6 20 11 19 14 9 10 12
A-01 x 42 C-01 x 20 B-01 x 20 INSTRUCTION FOR SAFE OPERATION FURNITURE PRODUCTION Ø8х35 Е-10 х 18Ø3х30 или Ø4х35 Е-03 х 12 Е-01 х 12 Ø4х13 Е-02 x 24 R-02/1x3 к-та Ø3х16 R-02/2 x 3 к-та L=350 мм Ø4х16 L=350 мм J-01x9 G-01 х 10 M-01 x5 F-01 x 74 Е-07 х 18 I-01 х 8 Ø2х20 Ø6,3х13 К-01 х 12 Н-01 х 4 PVA glue КЛЕЙ ПВА В-02 х 4 L-01/1 х 4 С-02 х 4 L-01/2 х 4 D-05 х 10 Е-08 х 10 1.
Assembly sequence of box E-03 F-01 picture 16 picture 17 picture 18 26. Fix handles (M-01) to the doors (16, 17) by means of screws for the handle (E-08) through laying under the screw for the handle (D-05) if necessary. ! Laying under the screw for the handle (D-05) can be absent in a complete set in the absence of need for them. ! THE DRESSER IS COLLECTED AND READY FOR OPERATION R picture 1 ! Collect a product in the lying position by front edges from top to bottom. (picture 1).
! Diagonals of a framework of a box have to be equal. 5. Insert a bottom of a box (11) into a groove of sidewalls (10,12) and a slip (9) a white surface down and fix it by nails (F01) to a back wall box (14) (picture 1). ! Separate directing (R-02) on two parts (R-02/1 and R-02/2) by means of pressing of a lever (picture 2) moved apart a guide. 6. Fix to sidewalls of a box (10, 12) ball guides (R-02/1) by screws of Ø4х13 mm (E-03) according to a headdress of Ø3 mm (picture 1).
! Diagonals of a framework of a dresser have to be equal. 18. Connect back walls (21) by means of a connecting level (23). ! Manufacturer by means of the adhesive tape reinforced instead of a level No. 23 can initially connect back walls No. 21. In that case the connecting level will be absent in a complete set. 19.
5. In openings of Ø15mm on the faces of sidewalls (1,2) insert couplers eccentric fast installation (B-02) according to the figure 6. 6. Fasten plates (N-01) at distance of 150 mm from the bottom and upper edge of sidewalls (1, 2) by means of screws of Ø4x16 R-02/ 2 mm (E-02) according to pic. 6. The E-01 ledge of a plate (N-01) concerning forward edge of sidewalls (1, 2) is equal to 5 mm. 7.
