Instruction for Assembly
26. Fix handles (M-01) to the doors (16, 17) by means of
screws for the handle (E-08) through laying under the screw for
the handle (D-05) if necessary.
! Laying under the screw for the handle (D-05) can be absent
in a complete set in the absence of need for them.
! THE DRESSER IS COLLECTED AND READY FOR
OPERATION
Assembly sequence of box
! Collect a product in the lying position by front edges from
top to bottom. (picture 1).
! Dowels (A-01) are inserted only after PVA glue has poured in
openings.
1. In openings of Ø8 mm on the end faces of sidewalls (10,
12) insert dowels (A-01).
2. Connect sidewalls (10, 12) and a wall back (14) by means
of screws of Ø4х35 mm (E-10).
3. Attach a slip (9) to the received earlier design.
4. Check squareness of a framework on diagonal according
to the picture 12.
picture 1
F-01
R
E-03
picture 16
picture 17
picture 18