Instruction for Assembly
стык стенок
R-02/ 1
R-02/ 2
1
2
!1=2
picture 12
picture 13
picture 14
! Diagonals of a framework of a dresser have to be equal.
18. Connect back walls (21) by means of a connecting level
(23).
! Manufacturer by means of
the adhesive tape reinforced
instead of a level No. 23 can
initially connect back walls No.
21. In that case the connecting
level will be absent in a
complete set.
19. Lay back walls (21,22)
white surface down and beat on
product perimeter with the help
of nails Ø2х20 mm (F-01) and
nails (F-01) through a washer
paper clip (K-01) on partitions
(13,15) receded from each edge
of 25 mm (a step between nails
is 150-170th).
! Washer paper clip (K-01) is
fixed in the direction,
longitudinal concerning a joint
of walls, according to the
picture 14.
20. Put a dresser in
vertical position (on basic
sidewalls (1,2) with thrust
bearings (G-01)) and attach
false-panels (7,8) to the received design, clamp eccentrics of fast
installation (V-02);
Assembly sequence of case
! Collect a product in the lying
position by front edges from top
to bottom.
! Dowels (A-01) are inserted only
after PVA glue has poured in
openings.
1. To the low revetted end
faces of sidewalls (1,2) at distance of
20-50 mm from back and forward
edges of a detail and also to socle
levels (19,20) (spaces of 250-300
mm and in the center) beat thrust
bearings with a nail (G-01) according
to picture 3.
2. In openings of Ø15mm on
the faces of the following details: 1,
2, 3, 6, 13, 15 – insert eccentrics (V-
01) according to the picture 4.
3. In openings of Ø8mm in the
end faces of the following details: 1,
2, 3, 6, 13, 15, 18, 19 – insert dowels
(A-01) according to picture 4.
! Free part of the inserted dowel
(A-01) shouldn't act concerning a
detail end face more than 12 mm.
4. In openings of Ø5 mm on
the faces of sidewalls (1, 2),
partitions (13,15), low horizontal
walls (6) and covers (4) (except for
two openings located in 18 mm from
a first line) twist screws of eccentrics
(S-01) according to the picture 5.
picture 3
Е-02
В-02
1
5
0
м
м
B
15 мм
5 мм
Н-01
С-01
B
5 мм
G-01
20-50 мм
В-01
А-01
B
15 мм
picture 4
picture 5
picture 6