Installation & Assembly

ManualsBrandsBrayden Studio ManualsCeiling LightsKwan 6 - Light Cluster Globe Pendant

Table Of Contents

TOOLS: You will need following tools or equipment:

ladder, screwdriver, adjustable wrench,

wire cutters and pliers.

MOUNTING HARDWARE PACKAGE: (2) Expanding nut,

(2) 1-4 x 1-1/4" screw, crossbar, green ground screw and

(2) wire connectors.

FIXTURE ASSEMBLY:

Determine the length of chain required to hang the fixture

at the desire height, remove or add chain Us desired. Using pliers,

open one end link of chain and attach to screw collar loop, attach

the quick link to end link of the chain and attach the quick link to

chain loop and then secure with small nut. Thread fixture wire and

Supply Ground Wire UP through every other link of chain.

TO SPREAD A LINK OF CHAIN

Use a pair of pliers and a screwdriver as shown above,

being careful to warp the jaws of the pliers with cloth

to protect the finish of the chain.

Outlet Box

Crossbar

Ground Screw

Wire connectors

2pcs

Canopy

Green Ground Wire

1-4 Screw,

Supplied with

Mounting Hardware pack

qualified

Page 1 of 6

Summary of content (6 pages)

PAGE 1
qualified TOOLS: You will need following tools or equipment: ladder, screwdriver, adjustable wrench, wire cutters and pliers. Outlet Box Crossbar Ground Screw Wire connectors 2pcs Green Ground Wire MOUNTING HARDWARE PACKAGE: (2) Expanding nut, (2) 1-4 x 1-1/4" screw, crossbar, green ground screw and (2) wire connectors.
PAGE 2
ASSEMBLY INSTRUCTION: READ AND SAVE THE INSTRUCTIONS. THIS PRODUCT IS FOR INDOOR USE ONLY! OUTDOOR USE COULD RESULT IN SHOCK, FIRE OR SERIOUS BODILY INJURY OR DEATH. ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES. IT IS STRONGLY RECOMMENDED THAT YOU USE A QUALIFIED ELECTRICIAN. THIS FIXTURE MUST BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE FIXTURE. FAILURE TO FOLLOW THIS REQUIREMENT COULD RESULT IN THE FIXTURE FALLING CAUSING SERIOUS BODILY INJURY OR DEATH.
PAGE 3
INSTRUCTIONS POUR L'ASSEMBLAGE : LISEZ ET CONSERVEZ LES INSTRUCTIONS. Le fait de ne pas lire et suivre attentivement toutes les instructions pourrait causer un incendie ou entraîner des blessures graves ou mortelles.
PAGE 4
INSTRUCTIONS POUR L'ASSEMBLAGE : LISEZ ET CONSERVEZ LES INSTRUCTIONS. CE PRODUIT EST CONÇU POUR ÊTRE UTILISÉ À L'INTÉRIEUR SEULEMENT! UNE UTILISATION À L'EXTÉRIEUR POURRAIT CAUSER UNE DÉCHARGE ÉLECTRIQUE, UN INCENDIE OU DES BLESSURES GRAVES OU MORTELLES. TOUT LE CÂBLAGE DOIT ÊTRE RÉALISÉ CONFORMÉMENT AUX NORMES NATIONALES ET LOCALES RELATIVES AUX INSTALLATIONS ÉLECTRIQUES. IL EST FORTEMENT RECOMMANDÉ DE CONFIER LE TRAVAIL À UN ÉLECTRICIEN QUALIFIÉ.
PAGE 5
INSTRUCCIÓN DE ENSAMBLAJE: LEA Y GUARDE LAS INSTRUCCIONES. No leer y no respetar todas las instrucciones con cuidado podría causar incendios y lesiones graves o la muerte. Para evitar descargas eléctricas, incendios o lesiones graves. que pueden ser mortales, es muy importante que corte la electricidad de la lámpara antes y durante la instalación. LEA TODAS LAS INSTRUCCIONES CON CUIDADO ANTES DE COMENZAR CON EL ENSAMBLAJE.
PAGE 6
INSTRUCCIÓN DE ENSAMBLAJE: LEA Y GUARDE LAS INSTRUCCIONES. ESTE PRODUCTO SOLO SE PUEDE USAR EN INTERIORES SI SE UTILIZA EN EXTERIORES PODRÍA CAUSAR DESCARGAS ELÉCTRICAS Y LESIONES GRAVES O LA MUERTE. DEBE COLOCAR TODO EL CABLEADO DE ACUERDO CON LOS CÓDIGOS ELÉCTRICOS NACIONALES Y LOCALES. SE RECOMIENDA UTILIZAR LOS SERVICIOS DE UN ELECTRICISTA CALIFICADO. ESTA LÁMPARA DEBE MONTARSE EN UNA CAJA DE SALIDA CERTIFICADA POR UL QUE TENGA LA CAPACIDAD DE SOPORTAR EL PESO.