BTI Ram Door Manual Model Type: 01 BTI Part Number: RD Revised: 01 January 2011
Breaching Door Installation The installation of the BTI training door is straightforward and most likely selfexplanatory by visual examination. Caution: Through our physical testing of actual doors during the development of this product, forces in excess of 3000 lbs. have been seen during a breach. Therefore it is advisable to anchor or mount your product accordingly. Typical house construction methods are not adequate for the numerous breaches for which this product has been designed.
Thank you for your purchase and use of the BTI Breaching Door system. This innovative and patented training device provides realistic training scenarios that are discussed on the following pages. Warranty Your new BTI Training door includes a 1-year manufacturer's warranty that covers quality and workmanship or 1500 breaches, which ever comes first. If at any time you are unsatisfied with this product or its operation, please feel free to contact us using any of the options listed under contacts below.
Three types of pins are available for use with the BTI training door: Wood Type - These pins simulate forces found when breaching a typical wood construction door/frame. This type of pin would normally be used to simulate a residential building breach. Metal Type - These pins simulate forces found when breaching a typical metal construction door/frame. This type of pin would normally be used to simulate a commercial building breach.
Lock Set Scenario 1 2 3 1 wood 2 wood wood 3 wood wood wood 4 metal 5 metal metal 6 metal metal metal 7 Reinforced Reinforced Reinforced After closing the door, the desired type and quantity of BTI pins are inserted into the sockets as shown below. The pin should insert a distance of approximately ¼” into the socket when fully seated. Due to stresses and strains imparted upon the door structure during breaching, slight misalignments will occur over time.
Spent pins may be extracted from the insertion direction utilizing a screw driver or similar tool as shown on the following page.
IMPORTANT NOTICE!! ATTN: BREACHING TRAINER Please deliver this notice to the BREACHING TRAINER BTI Breaching Pins and/or panels are required and MUST be used for training on ALL BTI Breaching Doors. The use of substitute pins or panels will result in loss of warranty. Pins and panels can be obtained by going to our web site: www.breachingtechnologies.com Contact BTI for a price quote by emailing: delj2121@sbcglobal.
End Use License Agreement BTI Breaching Doors are manufactured using a patented socket or panel system installed in the frame and door. It should be specifically noted that the Purchaser must use the BTI patented engineered pins or panels when breaching the door. Any use of a substitute product is strictly prohibited and would constitute a violation of BTI policy and thereby be in default of this Licensing Agreement notification.
