BTI Saloon Explosive Door Manual Model Type: 09 BTI Part Number: EDSA Revised: 01 January 2011
BTI Door Installation The installation of the BTI training door is straightforward and most likely self-explanatory by visual examination. Caution: Through our physical testing of actual doors during the development of this product, forces in excess of 3000 lbs. have been seen during a breach. Therefore it is advisable to anchor or mount your product accordingly. Typical house construction methods are not adequate for the numerous breaches for which this product has been designed.
Thank you for your purchase and use of the BTI Breaching Door system. This innovative and patented training device provides realistic training scenarios that are discussed on the following pages. The BTI Saloon Explosive Breaching Door is designed to promote realism in training. The door is not designed or intended to train explosive personnel on the sizing or design of breaching charges.
UTILIZED FOR ITS INTENDED PURPOSE UNLESS CAUSED BY THE GROSS NEGLIGENCE OR WILFUL MISCONDUCT OF BTI, ITS DIRECTORS, OFFICERS, SHAREHOLDERS, EMPLOYEES OR AGENTS.
IF AS THE PURCHASER OF THIS DOOR, YOU DO NOT SOLELY ACCEPT THE RISKS AS DEFINED ABOVE, PLEASE CONTACT BTI FOR A COMPLETE REFUND OR EXCHANGE FOR A DIFFERENT TYPE OF TRAINING DOOR. Warranty Your new BTI Saloon Explosive door includes a One Year Warranty against manufacturing deflects. Its useful life is solely a function of the type and quantity of charges utilized.
in a structure such as a training or live fire facility, or may be utilized with the optional freestanding kit. Pins. With the purchase of your BTI training door, you received a quantity of green explosive breaching pins. Although 4 types of pins are available for use with the various BTI training doors, only the Green pins are recommended for use in the BTI Explosive Breaching Doors. Breaching The Door.
sockets are provided in case damage occurs which makes one of the sockets unusable. Once the door has been breached, the broken pins may not fall out or may partially fall out.
used (as shown) to remove the spent pins from the opposite direction of installation. Spent pins may be extracted from the insertion direction utilizing a screw driver or similar tool as shown below. Explosives The BTI Saloon Explosive door is designed to function with “pushing type” charges only. The use of shape and cutting type charges will only damage the door and increase the risk for injury.
The door is designed to operate with typical operational weight “PUSHING TYPE” charges only. The use of excessive charges will only lessen the life of the door and increase the chance of injury. Typical methods of backing material for the charges are polyethylene, rubber conveyor belting and other plastic materials. Note that the chosen backing materials become fragmented projectiles during the subsequent explosion.
shields are not practical then the door should be placed in such a manner or location to allow trainees to have sufficient cover to protect them from the blast and accompanying fragmentation that will be propelled through the air in all directions. IMPORTANT NOTICE!! ATTN: BREACHING TRAINER Please deliver this notice to the BREACHING TRAINER BTI Breaching Pins and/or panels are required and MUST be used for training on ALL BTI Breaching Doors.
www.breachingtechnologies.com Contact BTI for a price quote by emailing: delj2121@sbcglobal.
End Use License Agreement BTI Breaching Doors are manufactured using a patented socket or panel system installed in the frame and door. It should be specifically noted that the Purchaser must use the BTI patented engineered pins or panels when breaching the door. Any use of a substitute product is strictly prohibited and would constitute a violation of BTI policy and thereby be in default of this Licensing Agreement notification.
