SDS

Storage: NFPA 30B Level 1 Aerosol. Protect from sunlight. Store in a well-ventilated place. Do not expose to temperatures exceeding 50 °C (122
°F) which may cause bursting. Store in corrosive-resistant container with a resistant inner liner.
Aerosol Level (if applicable) : Level 1
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines:
.
Ingredient(s) CAS # ACGIH OSHA
Diethylene glycol butyl ether 112-34-5 10 ppm (TWA) -
Sodium hydroxide 1310-73-2 2 mg/m
3
(Ceiling) 2 mg/m
3
(TWA)
Butane 106-97-8 1000 ppm (STEL) -
Isobutane 75-28-5 1000 ppm (STEL) -
Monoethanolamine 141-43-5 6 ppm (STEL)
3 ppm (TWA)
3 ppm (TWA)
6 mg/m
3
(TWA)
Undiluted Product:
Engineering measures to reduce exposure:
Good general ventilation should be sufficient to control airborne levels.
Personal Protective Equipment
Eye protection:
Chemical-splash goggles.
Hand protection:
Chemical-resistant gloves.
Skin and body protection:
If major exposure is possible, wear suitable protective clothing and footwear.
Respiratory protection:
No personal protective equipment required under normal use conditions.
Hygiene measures:
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Explosion limits: - upper: Not determined - lower: Not determined 13 19.4 °F -7 °C
* - Title 17, California Code of Regulations, Division 3, Chapter 1, Subchapter 8.5, Article 2, Consumer Products, Sections 94508
10. STABILITY AND REACTIVITY
Reactivity:
Not Applicable
Stability:
The product is stable
Possibility of hazardous reactions:
May vigorously react with acids resulting in spattering and excessive heat.
Hazardous decomposition products:
None reasonably foreseeable.
Materials to avoid:
Strong bases. Ammonia. Do not mix with chlorinated products (such as bleach). Do not mix with any
other product or chemical unless specified in the use directions. Strong acids.
Conditions to avoid:
Extremes of temperature and direct sunlight. Keep away from open flames, hot surfaces and sources of
ignition.
11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure:
Skin contact, Inhalation, Ingestion, Eye contact
Delayed, immediate, or chronic effects and symptoms from short and long-term exposure
Skin contact: Corrosive. Causes severe burns. Symptoms may include burns, blisters, redness and pain (which may be delayed).
Physical State: Aerosol Color: Opaque Tan
Evaporation Rate: No information available Odor: Citrus Slightly perfumed
Odor threshold: No information available. Boiling point/range: Not determined
Melting point/range: Not determined Decomposition temperature: Not determined
Autoignition temperature: No information available Solubility: Dispersible
Solubility in other solvents: No information available Relative Density (relative to water): 1.049
Density: 8.75 lbs/gal 1.049 Kg/L Vapor density: No information available
Bulk density: No information available Vapor pressure: No information available.
Flash point (°F): 19.4 °F -7 °C Partition coefficient (n-octanol/water): No information available
Viscosity: No information available Elemental Phosphorus: 0.00 % by wt.
VOC: 8.1 % * pH: 13
Flammability (Solid or Gas): Not applicable Corrosion to metals: Corrosive
Sustained combustion: Not applicable
BREAK-UP® Professional Oven & Grill Cleaner 3 of 5