SDS

This product, when diluted as stated on the label, is not classified as hazardous according to OSHA 29CFR 1910.1200 (HazCom 2012-GHS) and
Canadian Hazardous Products Regulations (HPR) (WHMIS 2015-GHS).
Hazard and Precautionary Statements
None required.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Classified Ingredients
Ingredient(s) CAS # Weight %
Hydroxyacetic acid 79-14-1 5 - 10%
Alcohol, C9-C11, ethoxylated 68439-46-3 5 - 10%
*Exact percentages are being withheld as trade secret information
4. FIRST AID MEASURES
Undiluted Product:
Eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least
15 minutes.
Skin: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water for at least 15 minutes.
Inhalation: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Ingestion: IF SWALLOWED: Rinse mouth. DO NOT induce vomiting unless directed to do so by medical personnel. Drink a cupful of milk or
water.
Most Important Symptoms/Effects: No information available.
Immediate medical attention and special treatment needed Not applicable.
Aggravated Medical Conditions: Persons with pre-existing skin disorders may be more susceptible to irritating effects.
5. FIRE-FIGHTING MEASURES
Specific methods:
No special methods required
Suitable extinguishing media:
The product is not flammable. Extinguish fire using agent suitable for surrounding fire.
Specific hazards:
Corrosive material (See sections 8 and 10).
Special protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH
(approved or equivalent) and full protective gear.
Extinguishing media which must not be used for safety reasons: No information available.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Put on appropriate personal protective equipment (see Section 8.).
Environmental precautions
and clean-up methods:
Clean-up methods - large spillage. Absorb spill with inert material (e.g. dry sand or earth), then place in
a chemical waste container. Use a water rinse for final clean-up.
7. HANDLING AND STORAGE
Handling: Can react to release hazardous gases. Mix only with water. DO NOT MIX WITH AMMONIA, BLEACH, OR OTHER CHLORINATED
COMPOUNDS. May vigorously react with strong alkaline products resulting in spattering and excessive heat. Avoid contact with skin, eyes and
clothing. Wash thoroughly after handling. Do not taste or swallow. Product residue may remain on/in empty containers. All precautions for handling
the product must be used in handling the empty container and residue. Avoid breathing vapors or mists. Use only with adequate ventilation.
Remove and wash contaminated clothing and footwear before re-use. FOR COMMERCIAL AND INDUSTRIAL USE ONLY.
Storage: Keep tightly closed in a dry, cool and well-ventilated place.
Aerosol Level (if applicable) : Not applicable.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Diluted Product:
Eyes: Rinse with plenty of water.
Skin: No specific first aid measures are required
Inhalation: No specific first aid measures are required
Break-Up® Professional Fryer Boil-Out Fryer Cleaner 2 of 5
Ingestion: IF SWALLOWED: Call a Poison Center (1-800-851-7145) or doctor/physician if you feel unwell.