Installation & Assembly

CAUTION
Read instruction carefully and turn
electricity off at main fuse box before
beginning installation
INSTALLATION & OPERATION INSTRUCTIONS Printed in China
TOOLS & MATERIALS REQUIRED
• Blade screw driver
• Adjustable wrench
• Step Ladder
• Wire cutters
• Wiring suppliers as required by electrical code
CAUTION: Before assembling your lighting fixture. Refer to the section titled
ELECTRICAL CONNECTIONS. If you feel you do not have electrical wiring
experience, refer to a do-it-yourself wiring handbook or have your fixture installed by
a qualified licensed electrician.
GENERAL:
1. To ensure the success of the installation. Be sure to read these instructions and
review the diagrams thoroughly before beginning.
2. All electrical connections must be in accordance with local codes, ordinances, or
the National Electrical Code. If you are unfamiliar with methods of installing
electrical wiring. Secure the services of a qualified licensed electrician.
3. Before starting the installation, disconnect the power by turning off the circuit
breaker or by removing the fuse at the fuse box. Turning the power off using the
light switch is not sufficient to prevent electrical shock.
This outdoor lantern is suitable for wet location.
The important safeguards and instructions appearing in this manual are not meant to
cover all possible conditions and situations that may occur. It must be understood that
common sense caution and care are factors which cannot be built into any product.
These factors must be supplied by the person(s) caring for and operating the fixture.
UNPACK THE FIXTURE
Check the contents of the box You should receive:
• Mounting bracket
• Mounting hardware
• Fixture
• Shade(s) (not provided on all models)
ASSEMBLY AND INSTALLATION
INSTRUCTIONS