Assembly Instructions

NO. Picture QTY

A 1

B 2

C 1

Assembly instructions

Caution : You must read this before you proceed

TABLE

CAUTION: This table is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Parts list

Leg Support

Description

Table Top

Leg with pre-attached Levellers

1 OF 5

PAGE 1
Assembly instructions Caution : You must read this before you proceed TABLE CAUTION: This table is NOT a TOY. Keep your child / children at bay in the process of assembly. Parts list NO.
PAGE 2
Hardware ① Bolt(M8*16) 19 ② Washer(8mm) 19 ③ Allen Wrench(8mm) 1 Assembly Preparation Before Beginning Assembly: Assembly Step Overview Table Top(A) Leg Support (C) Leg with preattached Leveller(B) FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective.
PAGE 3
Unpack and place all parts onto a clean soft surface. ③ ① ② B C Attach Leg with pre-attached Levellers(B) and Leg Support(C) with Bolts(①) and Washers(②) by Allen Wrench(③). DO NOT OVERTIGHTEN.
PAGE 4
Turn the table top upside down to a soft surface to avoid scratching. Attach Table Leg with Pre-attached Levellers(B) to the mounting position on the table top(A) with Bolts(①), Washers(②) by Allen Wrench(③). DO NOT OVERTIGHTEN. Adjust height for balance Adjust low for balance Turn the Table rightside up. Adjust the pre-installed Leveller until the Table is level with the ground. Then, proceed to tighten all Bolts and Nuts. Your table is ready for use.
PAGE 5
OF 5