Assembly Instructions

NO. Picture QTY

A 1

B 2

C 1

①

②

③

Assembly instructions

Caution: You must read this before you proceed

BENCH

CAUTION: This bench is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Allen Wrench(8mm)

Parts list

Description

Bench Seat

Leg with pre-attached Levellers

Hard ware

Studs(M8*16)

Washers(8mm)

Leg Support

1 OF 5

PAGE 1
Assembly instructions Caution: You must read this before you proceed BENCH CAUTION: This bench is NOT a TOY. Keep your child / children at bay in the process of assembly. Parts list Description QTY A Bench Seat 1 B Leg with pre-attached Levellers 2 C Leg Support 1 Studs(M8*16) 11 Washers(8mm) 11 Allen Wrench(8mm) 1 NO.
PAGE 2
Assembly Preparation Before Beginning Assembly: Assembly Step Overview Bench Seat(A) Leg with pre-attached Leveller(B) Leg Support (C) FRONT FACING This Bench has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Bench parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 3
Unpack and place all parts onto a clean soft surface. ③ ① B C Attach Leg with pre-attached Levellers(B) and Leg Support(C) with Bolts(①) and Washers(②) by Allen Wrench(③). DO NOT OVERTIGHTEN.
PAGE 4
Turn the Bench Seat(A) upside down on to a soft surface to avoid scratching. Attach Leg with Pre-attached Levellers(B) to the mounting position on the Bench Seat(A) with Bolts(①), Washers(②) by Allen Wrench(③). DO NOT OVERTIGHTEN. Adjust height for balance Adjust low for balance Turn the Bench rightside up. Adjust the pre-installed Leveller until the Bench is level with the ground. Then, proceed to tighten all Bolts and Nuts. Your Bench is ready for use.
PAGE 5
OF 5