Caution: You must read this before you proceed Single Chair Label Picture Description QTY A Left Armrest / Leg 1 B Right Armrest / Leg 1 C Seat 1 D Seat Back 1
Label Picture E F G H Description QTY Allen Key 1 Bolt (M6*30mm) Bolt (M6*40mm) Bolt (M6*60mm) 5 3 3 I Washer 13 J Seat Cushion 1 K Bolt (M6*20mm) 2 L Connection 1 M Connection 1 Before Beginning Assembly:
Step 1 Open the carton and place all the parts on a clean, non-marring surface. ATTENTION: Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly. The PE wicker should never be cut, but moved away from the mounting positions. Attach Left Armrest / Leg(A) to the Seat(C) using Bolt(F) and Washer(I) with Allen Key(E) as shown in the picture above. Loosely tighten the Bolts.
Step 3 Attach Right Armrest / Leg(B) to Seat(C) using Bolt(F) and Washer(I) with Allen Key(E ) as shown in the picture above. Loosely tighten the Bolts. Step 4 Connect the Chair Legs(A&B) with the Seat Back(D) using Washer(I) and Bolt(H) with Allen Key(E) as pictured above. Loosely tighten the Bolts.
Step 5 Check for stability and then tighten all Bolts at all joints. Note: DO NOT fully tighten a Bolt in one go and then move on to the next. Rather; in a sequential manner, gradually tighten each Bolt until all Bolts are evenly secured. This methodology will ensure maximum evenness once all Bolts are fully tightened. Step 6 Place the Seat Cushion(J) on the Chair. Your Chair is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.