Assembly Instrucstions

ASSEMBLY INSTRUCTIONS

NOTE TO CUSTOMERS:

• For ease and speed of assembly we recommend that before you commence each step of the

assembly that you identify all the parts required to complete that step.

• We recommend that where possible you allow sufficient space to assemble the item as close as

possible to the place where it will be once assembled.

• For the protection of your furniture we recommend that the product is placed on protected surfaces

during assembly to prevent any damage.

• During assembly do not over tighten,as this may damage the product.

• Please ensure you retain all the product packaging until the item completely assembled.

• Please periodically check all fittings and re-tighten as necessary.

• Please never allow any liquids to remain on your furniture as absorption can cause the wood to warp

or finish to de-laminate.

• It is recommended that this item should be assembled by two adults.

Desk

PAGE 1
ASSEMBLY INSTRUCTIONS Desk NOTE TO CUSTOMERS: • • • • • • • • For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled. For the protection of your furniture we recommend that the product is placed on protected surfaces during assembly to prevent any damage.
PAGE 2
ACROSS BAR 1PC ROUND HEAD SCREW 12 PCS
PAGE 3
STEP 1: ASSEMBLE DRAWER • Use screws （5）to attach drawer side panels (C & D) and back panel (B) together. • Insert drawer bottom panel (E) into the grooves of side panels (C & D) and back panel (B). • use screws （5）to attach drawer side panels (C & D) and drawer front panel (A) together. • Use round bolt (6 ）to attach knob (6) onto drawer front panel (A).
PAGE 4
STEP 2: ASSEMBLE SIDE FRAME (F & G) ,BOTTOM PANEL (H) AND ACROSS BAR (I) • Use wood dowels (1) cam-bolts & cam-locks (2) to assemble side frames (F & G) ,bottom panel (H) and across bar (I) together. STEP 3: ASSEMBLE MIDDLE PANEL ( J & K) • Use wood dowels (1) and cam-bolts & cam-locks (2) to assemble middle panels (J & K) and bottom panel (H) together. • Use screw（3）to attach stopper (3) and bottom panel (H) together.
PAGE 5
PAGE 6