Material Safety Data Sheet

Breathing Color, Inc 1221 E. Dyer Road, Suite 150 Santa Ana, CA 92705 P. 866.722.6567 http:// www.breathingcolor.com
Timeless
A Giclee Print Varnish
Material Safety Data Sheet
1. Chemical Product and Company Identification
Product Identification: Timeless Overprint Varnish (Gloss, Satin or Matte)
230 E. Alondra Blvd.
Gardena, Ca 90248
Phone #
[phone]
Date
Prepared:
9/24/2008
2. Composition/Information on Ingredients
The exact chemical composition of Timeless Overprint Varnish is a trade secret.
CAS #
Weight %
Components
7732-18-5
63-71%
Water
8902P
29-37%
Acrylic copolymer
1-2%
Proprietary ingredients
*Ingredients not precisely identified are either proprietary or non-hazardous
3. Hazardous Identification
The Timeless Overprint Varnish has not been tested for health effects due to exposure. The potential or anticipated
health effects are assumed to be the same as those determined for the components that represent greater than 1% of the
mass of the formulation.
Skin Contact: May cause irritation, based upon testing of similar materials.
Inhalation: Inhalation of vapor may cause respiratory tract irritation.
Ingestion: May be harmful if swallowed.
4. First Aid Measures
Skin Contact: Wash thoroughly with soap and water. Seek medical attention if symptoms occur.
Inhalation: Avoid breathing vapors. Move to fresh air and seek medical attention if symptoms occur. If breathing is
difficult, give oxygen. Please note; symptoms may be delayed; prompt medical attention may be required. Call a
physician.
Eye Contact: Avoid contact with eyes. Flush eyes thoroughly with water for 15 minutes and seek medical attention if
symptoms occur.
Ingestion: Do not induce vomiting. Immediately give 2 glasses of water. Never give anything by mouth to an
unconscious person. Call a physician.
5. Fire Fighting Measures
Flash Point:
N/A
Auto-ignition Temperature:
N/A
Lower Explosive Limit:
N/A
Upper Explosive Limit:
N/A
6. Accidental Release Measures
Steps To Be Taken In Case Material Is Spilled Or Released: Absorb material with sawdust or other inert powder or
medium and dispose of in accordance with all federal, state and local regulations. As a precautionary, avoid contact with
eyes, skin and clothing.
7. Handling And Storage
Keep container closed when not in use. Store container away from extreme heat sources. Store at temperatures between