Specifications

Chapter1
Specifications&Clearances
America’sFavoriteStovesSince1980 Page5
INSTALLATION
Several issues must be addressed when selecting a suitable location for your new Mahogany Wood Stove.
Observingrequiredclearancesto combustiblematerials, theproximitytoa safe chimney, andelectricalsupply
(ifoptional blowerinuse) mustallbeconsidered.Inaddition,selectingalo cation thattakesadvantageofthe
building’s
natural air flow is also desirable to maximize the heating effectiveness of the stove.In many cases,
thoughnotall,thisisacentrallocationwithinthebuilding.
StoveSpecificationsandPerformance
CombustionSystem: NonCatalytic HeatingCapacity: Upto1,800sf
EPAGramsperHour: 2.28 ApproximateBurnTime: 7
9Hours
HeatOutput(BTU’s/perhour: 9,500
37,000 LogLength: 18”
ExhaustDiameter: 6”

Width: 25” 
Depth: 221/2” 
Weight: 430lbs. 

WhenusedasaFreestandingModel WhenusedasanInsertModel
HeightwithLogStorage
Pedestal:
371/8”toFront HeightwithLargeFlashing: 321/16”
3813/16”to
Shroud
HeightwithMediumFlashing: 30
1/16”
HeightwithStandardPedestal: 311/4”toFront Heightofunitinsidefireplace: 201/2”
327/8”ToShroud HeightofStove: 1813/16”
 WidthwithMediumFlashing: 42”
 WidthwithLargeFlashing: 481/2”
 DepthInsideofFireplace: 15”
Clearances
FreestandingModel
The stove must be placed on continuous (grouted
joints) noncombustible material such as ceramic tile,
cement board, brick, 3/8” millboard or equivalent ¼”
material with a k+ .84 insulation factor, or other
approvedorlistedmaterialsuitedforfloorprotection.
Check local codes for approved alternatives.
Clearancesfor
floorprotectionaremeasuredfromthe
sides, back, and face (door opening) as shown in
Figure1.
NOTE:ForCanadianinstallationsyouarerequiredto
have18”infrontofthestoveand8”fromthesides.
ThehearthpadforCanadianinstallationsmusthave
minimumdimensionsof46”x41”.
NOTE:Forsomeinsertinstallationsyoumaybe
requiredtouseahearthextensioninordertomeet
requiredclearances.Ifso,theextensionsmustmeet
thesamecriteriaasthehearth.
Figure1