X SERIES LID USER GUIDE
ASSEMBLY INSTRUCTIONS STEP 1 STEP 3 Remove lid, handle, and screws from packaging. Using your fingers, begin threading the screws through the lid holes into the handle. (Lid tabs should be on bottom, handle on top). STEP 2 Gather a flathead screwdriver, and ideally have some sort of slot to hold the lid in place during assembly (between your legs works great). STEP 4 Using the flathead screwdriver, tighten the screws in place to firmly attach the handle to the lid.
! FOR YOUR SAFETY Always wait until the fire has burned down to ash only, with no wood or large coals left in the fire pit. Putting the lid on your fire pit can damage the lid with the heat causing discoloration and warping, as well as causing creosote drips to form on your fire pit and the surface it is placed on. Creosote cools to a hard, tar-like substance that is very difficult to clean off of any surface, and can cause corrosion and discoloration.
Breeo, LLC warrants to the original purchaser that the Breeo Fire Pits and Accessories are free from workmanship and material defects during the lifetime of the original purchaser. In addition Breeo, LLC warrants no rust through or burn through for a period of five (5) years from purchase. If a product is covered by this limited warranty, Breeo, LLC, at its option, will repair or replace with a new product free of charge, excluding any applicable shipping and handling charges.
