Use and Care Manual

Operator's Manual

Breez™ R2 Propane Powered Tiller

Check for parts online at www.breezpropanetillers.com or call 800-345-6007 M-F 8-5

15290 DRAG STAKE BRACKET KIT INSTALLATION OPTIONAL ACCESSORY

The Drag Stake Bracket Kit is very eective for ensuring depth control and straight rows while tilling.

1. Flip the ON/OFF switch to the OFF position. Remove the tilling tines or other working tools.

2. Remove bolts (4649) and nuts (4650) from transmission casting. SEE FIGURE 9

3. Secure bracket (4633) to transmission casting with bolts (4649) and nuts (4650). SEE FIGURE 9

4. Place drag stake (4600) in bracket (4633) and secure at desired depth with lock pin (18039). SEE FIGURE 10

5. Replace tilling tines.

NUT (4650)

BOLT (4649)

BRACKET (4633)

LOCK PIN (18039)

DRAG STAKE (4600)

FIGURE 10

FIGURE 8 FIGURE 9