Use and Care Manual

FAN STORAGE:

Make sure to store it in a safe and dry location away from the reach of

children. We recommend using a dust cover to protect the fan from dust, place

it away from where parts can be damaged.

Overload Protection Fuse

This product employs overload protection (fuse). A blown fuse indicates an

overload or short-circuit situation. If the fuse blows, unplug the product from

the outlet. Replace the fuse by following the servicing instructions below

(follow product marking for proper fuse rating). If the replacement fuse also

blows, a short-circuit may be present and the product should be discarded, or

call the customer assistance to arrange for a possible product repair.

 Grasp plug and remove it from the receptacle or other

outlet device. Do not unplug by pulling on cord.

 Select a suitable tool such as a small flat screwdriver.

 Open the fuse access cover by sliding or prying it open.

 Carefully remove the fuse by prying it out from one end or

by turning the fuse holder over.

 Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse. Gently press the

new fuse into the slot at both ends. Do not press on the glass tube.

 Close the access cover until it is flush with the plug face.

 Do not replace the plu. It contains safety devices (fuse, AFCI, LSDI) that

should not be removed. Discard the product if the plug is damaged.

Tips

 Do not use excessive force when replacing the fuse or damage to the fuse

or plug may occur.

 If it’s hard to close the access cover, make sure the fuse is fully inserted.