Product Description

8
Step 4: as shown in Fig. 3-4, loosen the screw on the upright support, adjust it
to an appropriate angle and tighten it again;
chart 3-4
3.2 wall mounted installation
chart 3-5
Step 1: as shown in Figure 3-5, fix the sheet metal on the back of the machine
body with screws ①;
Step 2: Mark four positioning points on the wall to confirm the installation
position of the wall hanging support;
Step 3: as shown in Figure 3-5, align the four holes on the wall hanging
bracket with the wall positioning point, lock four self tapping screws ②, and fix
the wall hanging bracket;