Product Description

3 installation instructions

Please check before installing the product to ensure that the product can

work normally.

This document provides wall mounted installation methods for reference,

and other installation instructions can be obtained by contacting our

personnel;

3.1 gate type installation

chart 3-1

Step 1: as shown in Figure 3-1, if there is no hole on the gate panel, it is

necessary to use a punch to make a circle with a diameter of 35mm on the

gate panel;

Step 2: as shown in Figure 3-2, thread the external wiring of the identification

terminal and the vertical pole support through the hole on the gate panel;

Step 3: as shown in Figure 3-3, thread and tighten the upright nut from below

to fix the identification terminal;

Chart3-2

chart 3-3