User Manual

5 MEGA PIXEL GAME CAMERA
INSTRUCTION MANUAL
GAME CAMERA FRONT
Hanger for
mounting strap
Battery Door
Batteries
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
AA
AA
AA
AA
AA
AA
AA
AA
Game Camera requires 8 AA batteries.
Insert as pictured.
1. To ensure the chip's initialization process complete,
please wait 4 seconds after install the batteries
before turn on the device.
2. The product requires class 6 or above TF card.
AAx8
Batteries
ON OFF
ON OFF
Micro SD
Card Slot
Mini USB Port
(for viewing and
transferring photos)
On & Off
Switch
Preview
Buttons
UP
29
Mounting Strap
USB Cable
Battery Tray
5 MP Lens
IR Lights
Motion Sensor
Nail or Screw Hanger
Preview Screen
Steps for set up , operation, and image viewing
1. Remove Battery Tray
2. Insert Batteries 8 (AA)
3. Insert Battery Tray. NOTE Detail pictures below. You must
insert tray with the curves at the edged of the tray orientated
the correct way. Failure to orientate the tray correctly will
break plastic tabs in the corners of the camera housing which
will reduce the integrity of the camera body.
4. Insert Micro SD Card (up to 32GB) into the Micro SD card slot.
***There is no programming required to set up the camera.***
5.
Turn Camera “On” by sliding the selector switch to the “On” position.
6. The camera screen should show what it in front of the lens as
an image. You can test by looking directly at the lens. You should
see yourself on the “Preview Screen”.
7. After a few seconds you will see a countdown appear that will
countdown from 30 until 0. After the countdown is complete the
camera is on and taking pictures based on movement in front of
the motion sensor.
8. To view pictures recorded by the camera on the micro sd card which is in the camera depress
one of arrows for a few seconds and the camera will switch into a “view mode”. You may
advance the pictures by depressing the arrow keys. When you are finished previewing pictures
the camera will resume normal operation after no buttons are depressed for a few seconds.
The camera can also be connected to a computer via USB cable. To connect to a computer via
USB cable, slide the on and off swicth to “off”. insert the Micro USB cable to the camera and then
to a computer. You will see a connection icon appear on the camera screen. You can now look
at pictures on your personal computer with your favorite JPEG viewer.
9. Mounting can be done with the nylon strap provided or
by screw or nail through the screw or nail hanger located on
top of the camera.
Questions or comments please call
866-252-3811
www.bresserusa.com
GAME CAMERA BACK
Hanger for
mounting strap
Battery Door
Batteries
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
AA
AA
AA
AA
AA
AA
AA
AA
Game Camera requires 8 AA batteries.
Insert as pictured.
1. To ensure the chip's initialization process complete,
please wait 4 seconds after install the batteries
before turn on the device.
2. The product requires class 6 or above TF card.
AAx8
Batteries
ON OFF
ON OFF
Micro SD
Card Slot
Mini USB Port
(for viewing and
transferring photos)
On & Off
Switch
Preview
Buttons
UP
29
Mounting Strap
USB Cable
Battery Tray
5 MP Lens
IR Lights
Motion Sensor
Nail or Screw Hanger
Preview Screen
Steps for set up , operation, and image viewing
1. Remove Battery Tray
2. Insert Batteries 8 (AA)
3. Insert Battery Tray. NOTE Detail pictures below. You must
insert tray with the curves at the edged of the tray orientated
the correct way. Failure to orientate the tray correctly will
break plastic tabs in the corners of the camera housing which
will reduce the integrity of the camera body.
4. Insert Micro SD Card (up to 32GB) into the Micro SD card slot.
***There is no programming required to set up the camera.***
5.
Turn Camera “On” by sliding the selector switch to the “On” position.
6. The camera screen should show what it in front of the lens as
an image. You can test by looking directly at the lens. You should
see yourself on the “Preview Screen”.
7. After a few seconds you will see a countdown appear that will
countdown from 30 until 0. After the countdown is complete the
camera is on and taking pictures based on movement in front of
the motion sensor.
8. To view pictures recorded by the camera on the micro sd card which is in the camera depress
one of arrows for a few seconds and the camera will switch into a “view mode”. You may
advance the pictures by depressing the arrow keys. When you are finished previewing pictures
the camera will resume normal operation after no buttons are depressed for a few seconds.
The camera can also be connected to a computer via USB cable. To connect to a computer via
USB cable, slide the on and off swicth to “off”. insert the Micro USB cable to the camera and then
to a computer. You will see a connection icon appear on the camera screen. You can now look
at pictures on your personal computer with your favorite JPEG viewer.
9. Mounting can be done with the nylon strap provided or
by screw or nail through the screw or nail hanger located on
top of the camera.
Questions or comments please call
866-252-3811
www.bresserusa.com
• Explore Scientific Branded Telescopes: *Limited* USA One Year Warranty, Extendable
to Unlimited Lifetime Warranty
• Explore Scientific Branded Eyepieces: One Year Warranty, Extendable to Unlimited
Lifetime Warranty
• Explore Scientific Branded Non-Electronic Telescope Accessories: *Limited* USA One
Year Warranty, Extendable to Unlimited Lifetime Warranty
Warranties Listed Below Apply to the Following Branded Products:
• Explore One, Bresser, National Geographic, Eduscience
• Telescopes: 90 Days or Extendable to *Limited* USA One Year Warranty
• Microscopes: 90 Days or Extendable to *Limited* USA One Year Warranty or Limited
Lifetime
• Rifle Scopes: 90 Days or Extendable to *Limited* USA Five Year Warranty or USA
Limited Lifetime
• Binoculars & Spotting Scopes: 90 Days or Extendable to *Limited* USA One Year
Warranty or USA Limited Lifetime
• Laser Range Finder, Cameras and Electronics: 90 Days or Extendable to *Limited* USA
One Year Warranty
• Third-Party Products: Warranty is provided by Third Party Manufacturers
*Limited Warranty is in the USA and its territories, extended to our Transferable
Unlimited Lifetime Warranty when product is registered on the available Explore
Scientific Branded Products.
Product registration must be completed within 60 days of purchase. Limited Warranty
is transferable from original owner (Original owner may include person receiving brand
new product as a gift).
Certain state laws do not allow limitations on implied warranties or the exclusion or
limitation of certain damages. If these laws apply to you, some or all of the disclaimers,
exclusions or limitations may not apply to you, and you might have additional rights.
Product Registration (continue)
1
3
2
4