Quick-Start Guide

ManualsBrandsBretford ManualsCarts & AccessoriesMobile Projector Cart

Assembly Instructions

ECILS1 / ECILS1FF

MOBILE COMPUTER

WORKSTATION

Qty Part# Description

1 022-2006 Top Shelf w/ grommet hole

1 010-4513 Slide Out Shelf

1 010-3953 Bottom Shelf

2 010-4506 Shelf Support Brackets

1 022-2311 Right Front Leg

1 022-2310 Left Front Leg

1 022-2313 Right Rear Leg

1 022-2312 Left Rear Leg

1 022-2309 Wire Tray

2 015-0002 4" Casters w/o Lock

2 015-0003 4" Casters w/ Lock

1 030-1191 14" Full Extension Slide

1 CFPS Electrical Unit - ECILS1FF ONLY

PARTS LIST

Ref Qty Part# Description

AA 16 030-0300-21S 5/8" Square Head Bolts

BB 16 030-0002 5/16-18 Hex Serrated Nuts

CC 12 030-0304 1/4-20 x 5/8" Combo Screws

DD 8 030-1228 8-32 x 1/4" Combo Truss Hd Screws

EE 4 030-1203 #8-32 Acorn Nuts

FF 2 020016 #6-32 Hex Nuts - ECILS1FF ONLY

GG 2 020017 #6-32 x 1/4" Screws - ECILS1FF ONLY

HH 4 02236 8-32 Hex Flange Nuts

1 010-1106 Hex Wrench

HARDWARE LIST

Lay the rear legs on a carpeted surface (they are stamped "LR" and "RR") with the three top

holes facing up and the bracket facing up as shown in Figure 1. Slide the top shelf (with hole

at rear) and bottom shelf (with 4 square holes toward front) onto the legs so that the brackets

are inside the shelves (see Figure 2).

STEP 1

TOOLS REQUIRED

Hex Wrench (Provided)

Phillips Screwdriver

Rubber Mallet

FIGURE 1

FIGURE 2

TOP

BOTTOM

Align shelf embossed mounting

hole with leg mounting bracket.

2 corners each shelf.

"LR" "RR"

Summary of content (6 pages)

PAGE 1
ECILS1 / ECILS1FF MOBILE COMPUTER WORKSTATION Assembly Instructions PARTS LIST Qty 1 1 1 2 1 1 1 1 1 2 2 1 1 Part# 022-2006 010-4513 010-3953 010-4506 022-2311 022-2310 022-2313 022-2312 022-2309 015-0002 015-0003 030-1191 CFPS HARDWARE LIST Description Ref Top Shelf w/ grommet hole AA Slide Out Shelf BB Bottom Shelf CC Shelf Support Brackets DD Right Front Leg EE Left Front Leg FF Right Rear Leg GG Left Rear Leg HH Wire Tray 4" Casters w/o Lock 4" Casters w/ Lock 14" Full Extension Slide Electrical Uni
PAGE 2
"RF" "LF" Align shelf embossed mounting hole with leg mounting bracket. 2 corners each shelf. STEP 2 Slide the front legs (they are stamped "LF" and "RF") onto the shelves so that the brackets are inside the shelves. STEP 3 Secure shelves and legs together with bolts (AA) and nuts (BB) in each corner as shown. BB AA STEP 4 Insert each caster into the bottom of each leg. If caster does not insert easily, use a rubber mallet to tap caster in place. Once casters are SECURELY in place, stand unit upright.
PAGE 3
SHELF SUPPORT BRACKET See Detail 'A' THESE HOLES MUST FACE FRONT EDGE OF CART. (SIDE OPPOSITE THE GROMMET) DETAIL 'A' CC FIGURE 3 EE DD Attach rear screw & nut FIRST. To access the correct holes, slide inner piece out slightly. FIGURE 4 STEP 5 Attach shelf support brackets to upper portion of rear legs with screws (CC) as shown in FIGURE 3. Refer to Detail 'A' for correct position of bracket.
PAGE 4
HH FIGURE 5 DD FIGURE 6 STEP 6 Attach the remaining slide pieces to the pull out shelf with screws (HH) and nuts (JJ) as shown in FIGURE 5. Then slide shelf into cart as shown in FIGURE 6.
PAGE 5
See Detail 'B' REAR VIEW STEP 7 Slide the cord bin between the rear legs and align slotted holes of the cord bin sides with the (2) mounting holes of the legs. Position the cord bin per Detail 'B' to obtain desired height and install four screws (CC).
PAGE 6
STEP 8 - FOR MODEL ECILS1FF ONLY Align the CFPS electrical unit with the slots in the inside of the cord bin. Secure the unit in place with screws (FF) and nuts (GG) as shown. FF Bretford 11000 Seymour Avenue Franklin Park, IL 60131 TEL: 847.678.2545 800.521.9614 FAX: 847.678.0852 800.343.1779 GG Bretford Ltd. 2 Etongate 110 Windsor Road Slough, Berkshire SL1 2JA England TEL: 01753 216531 FAX: 01753 539478 www.bretford.com Part # 031-6487 Rev. 05.17.