Datasheet

28 800.521.9614 BRETFORD.COM
The EDU 2.0 T-leg tables are designed to support todays smaller, lighter educational technologies. All encompassing aesthetics, designed and engineered for today’s
technologies and learning modalities the T-Leg tables are the ideal line for multi-purpose educational environments.
 •Accommodating:Lightweight and easy to move. One-person reconfigurability. Power above the work surface enable today’s technologies.
 •Mobile: Locking casters allow for ease of mobility.
 •Stable:Glides support stationary installations.
 •CordFriendly: Optional modesty panel doubles as a cord management tray and conceals and organizes wires when in use or stored.
 •PowerReady:Designed for use with the Fluid Up Power System that allows up to 6 or 8 tables to daisy chain off of a single wall outlet. For use with the UL
Recognized 2-outlet power modules with choice of two USB power or two RJ45 data. Fluid Up power modules are included, specify power version at the time
of order.
 •Durable: Designed and engineered to meet or exceed ANSI/BIFMA X5.5-2008 strength and safety standards. Finished with powder-coated paints to withstand
long-term use.
 •Options: Tables come in a variety of sizes, paint, and laminate choices.
 •Guaranteed: EDU 2.0 T-Leg tables are backed by a 12-year warranty. Electrical components are backed by a 1-year warranty.
 •GREENGUARD
®
Children and School certification pending.
 •CarbonNeutral
®
Certified Product
T-LEG TABLE BASE
Upper and lower leg assemblies are constructed
with 14-gauge flat oval tubing, which is formed
using a CNC tube bender and features arc welded
connections to the mounting plate. The upper leg
assembly mounts to the underside of the work
surface with 12 metal-to-metal screw connections
through a 14-gauge steel plate. Each leg plate
secures with six screws that secure into metal
inserts in the underside of the tabletop. The lower
leg assembly telescopes inside the upper assembly
allowing for height adjustability from 26” to 31” in 1”
increments. The lower leg is available with the choice
of 2.5” diameter twin wheel casters, all with locking
brakes, or with 1” adjustable leveling glides.
COLLABORATIVE LAPTOP WORK SURFACE WITH
FLUID UP POWER CUT OUT
Work surfaces feature a 1” thick 45 lb. density core
with .03” high-pressure laminate top and a .03”
backer. Table work surfaces feature an 8”W x 4”D
with 1/8” corner radii, cut out at the center rear of
the work surface to accommodate a Fluid Up power
unit. Fluid Up power modules are included, specify
power version at the time of order. Base models
come with a 3 mm Thermoplastic elastomer (TPE)
t-mold (Edge Detail 01). The underside of the work
surface includes 12 metal inserts that align with the
leg mounting plates and allows for a strong metal-to-
metal connection.
MODESTY PANEL AND CORD MANAGEMENT
Modesty panels double as a cord management
raceway and are constructed from 18-gauge steel.
Panels cover the distance between the leg uprights
and are formed to follow the arc of the upper leg
tubes. Ends are open to allow cables to run from
one table to the next when used in rows. The outer
modesty panel face features a center located access
cover, which slide snaps into place and provides
easy access to cords from the backside of the
table. Cover does not require tools for assembly.
The access cover is constructed from 18-gauge
steel. An L shaped 18-gauge bracket mounts to the
underside of the work surface for mounting electrical
strips and orientates the plugs facing the rear of
the table behind the access cover. Access to cord
management is also available from the underside
of the work surface. Two flat oval cable cut outs are
located on either side of the center access cover to
allow cords to easily pass from table to table when
used in an L shaped configuration or when used
back to back.
WORK SURFACE EDGE DETAIL 01
Tables with edge detail 01 have a 3 mm
thermoplastic elastomer (TPE) t-mold edge band,
which runs the entire perimeter of the work surface.
TPE is non-toxic, additive and phthalate free, and
recyclable at the end of the product life cycle. In
landfill conditions TPE will break down, releasing
only water and biodegradable components. TPE is
a highly flexible material that consumes less energy
during manufacturing and preferable to polyvinyl
chloride (PVC). PVC is constructed with chlorine
and when burned omits toxic byproducts such
as dioxins, chlorocarbons and hydrochloric acid.
Additionally PVC is constructed using a significant
amount of lead, which is highly toxic during the
roduct life cycle and after disposal.
FLUID UP POWER COMPONENTS
Each table includes a Fluid Up power module,
specify power version at the time of order.
Daisy chain Fluid Up power modules require the
additional purchase of Power In-Feed and Bypass
Jumper Cables.
FINISH OPTIONS
Tables can be ordered in any standard laminate, trim
and powder paint offered by Bretford
®
.
CONSTRUCTION AND ENVIRONMENTAL TESTING
T-Leg tables have been tested to meet or exceed
ANSI/BIFMA X5.5-2008 standards for tables and
desks. GREENGUARD
®
Children and Schools indoor
air quality certification is pending. CarbonNeutral
®
certified product.
RECYCLED CONTENT
Tables are constructed with a steel base that
is comprised of a minimal 25% to 35% post-
consumer recycled material. All steel components
are completely recyclable at the end of the product
life cycle. Work surfaces with HPL have an MDF
substrate constructed with an average of 70%
recycled content.
SPECIFICATION INFORMATION
EXPLORE
™
T-LEG COLLABORATIVE
LAPTOP TABLE
TABLES