User Manual

15
Inserting the Portafilter
Place the portafilter underneath the group head
so that the handle is aligned with the INSERT
position. Insert the portafilter into the group
head and rotate the handle towards the center
until resistance is felt.
LOCK
INSERT
Preset Shot Volume - 1 CUP button
Press the 1 CUP button once to extract a single
shot of espresso at the preset volume (approx.
1oz / 30ml). The extraction will start using the
low pressure pre-infusion (see page 16).
The machine will stop after the preset volume
has been extracted.
PROGRAM
NOTE
The amount of espresso extracted in the cup
will vary depending on your grind size and
grind amount settings.
NOTE
Pressing the 1 CUP or 2 CUP button during a
preset shot volume will immediately stop the
extraction.
Preset Shot Volume - 2 CUP button
Press the 2 CUP button once to extract a
double shot of espresso at the preset volume
(approx. 2oz / 60ml). The extraction will
start using the low pressure pre-infusion
(see page 16). The machine will stop after the
preset volume has been extracted.
PROGRAM
Re-Programming
Shot Volume - 1 CUP Button
1. To begin programming, press the
PROGRAM button once. The machine will
beep once and the PROGRAM button will
begin to flash. This indicates the machine is
in programming mode.
2. Press 1 CUP button to start espresso
extraction. Press 1 CUP button again
once desired volume of espresso has been
extracted. The machine will beep twice to
indicate the new 1 CUP volume has been
set.
Re-Programming
Shot Volume - 2 CUP Button
1. To begin programming, press the
PROGRAM button once. The machine will
beep once and the PROGRAM button will
begin to flash. This indicates the machine is
in programming mode.
2. Press 2 CUP button to start espresso
extraction. Press 2 CUP button again
once desired volume of espresso has been
extracted. The machine will beep twice to
indicate the new 2 CUP volume has been set.