User Manual

10 11
OPERATING YOUR BREVILLE PRODUCT OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Unpack all parts and accessories before
removing and safely discarding all packaging
material and promotional labels. Ensure the
power cord is unplugged from the power outlet.
Wipe the exterior stainless steel housing with
a soft, damp cloth. Wash the bean hopper and
lid, coffee basket, gold tone filter and carafe in
warm, soapy water and a soft cloth. Do not use
abrasive cleansers, pads or cloths which can
scratch the surface. Rinse and dry thoroughly.
INITIAL SET UP
1. Install the Bean Hopper
Position the hopper onto the machine. Turn the
locking knob clockwise in the direction of the
LOCK arrow until it clicks. Fill the hopper with
fresh beans.
We recommend always keeping the hopper full
(0.5lb maximum) to ensure there are sufficient
beans. However, never over-pack the hopper
as this may result in the grinder jamming.
Replace the hopper lid.
NOTE
For easy removal, transfer and storage
of beans, the hopper can be removed
by turning the locking knob counter-
clockwise in the direction of the UNLOCK
arrow. If you have removed the hopper,
ensure it is securely reassembled back
onto the machine. The safety interlock
system will prevent operation if the
hopper is incorrectly assembled. The LCD
screen will flash ‘LOCK BEAN HOPPER’
until the issue is resolved.
FRESH IS BEST
To get the most out of your Grind Control™
coffee brewer we recommend using quality
freshly roasted whole bean coffee & grind right
before you brew. Coffee is at its peak flavor
potential 5-20 days after roasting. Always buy
coffee with a “Roasted On” date printed on
the bag and avoid buying coffee with a “Best
Before” or “Use By” date, as you never know
when it was roasted. Coffee loses flavor and its
aromatics once it’s ground, so grinding right
before you brew is the key to great tasting
coffee with superior flavor and aroma.
PRODUCT OVERVIEW
Your Grind Control™ coffee brewer is the first
drip coffee maker with an adjustable built-in
grinder and calibration mode.
The adjustable grinder features machined
stainless steel burrs that allow you to adjust
the coarseness or fineness to optimize flavor
balance.
The calibration mode allows you adjust the
amount of coffee delivered on any strength/
cup size setting to suit coffee of varying grind
size, origins, age and degree of roast, so you
can achieve the maximum flavor potential from
any coffee you choose.
The Grind Control™ also allows you to brew a
single cup or travel mug in “cup” mode or from
2 to 12 cups in “carafe” mode.
2. Plugging in the Power Cord
Unwind the power cord completely and insert
the power plug into a grounded 110-120V
power outlet. The LCD screen will illuminate.
NOTE
The coffee machine will enter POWER
SAVE mode after remaining idle for
10 minutes. Press any button to exit
POWER SAVE mode and re-start the
machine.
3. Install the Coffee Basket
For best results, we recommend pre-heating
the coffee basket by running it under hot tap
water. Dry the coffee basket thoroughly, taking
particular care to completely dry the chute
area. Line the coffee basket with either the
provided gold tone filter or a paper filter.
Never use both at the same time.
a) Provided gold tone filter. When using
the gold tone filter, be sure that the
handle is positioned towards the hinge
area of the coffee basket. Otherwise the
handle may interfere with the flow of
ground coffee into the gold tone filter.
HANDLE TOWARDS
COFFEE BASKET HINGE
ENSURE CHUTE
AREA IS
COMPLETELY DRY
NOTE
The gold tone filter will allow some fine
coffee grounds to fall into the coffee. This
will appear as sediment in the cup or
carafe. This is normal.
Only use the gold tone filter provided as
others may cause the machine to overflow.
b) Paper filter Use an 8-12 cup, flat base
basket style paper filter with ~ 3¼"/8.25cm
base. Ensure that the paper filter is
completely open and touching the side
walls and bottom of the coffee basket.
Close the coffee basket lid. Press the OPEN
button to open the swing-out door. Attach
the coffee basket to the swing-out door by
ensuring the hinge area of the coffee basket is
firmly seated in its most downward position
on the two door hooks. Close the door until it
clicks shut.
CLICK
NOTE
The safety interlock system will prevent
operation if the coffee basket is not in
place, if it is not firmly seated on the two
door hooks, or if the swing-out door is not
closed. The LCD screen will flash ‘EMPTY
COFFEE FILTER’ until the issues are
resolved.