Instruction Manual

16
NOTE
To override the setting during operation, press
the LONG BLACK dial. Pressing the LONG
BLACK dial during the espresso extraction
will stop the flow of espresso and start the flow
of hot water. Pressing the LONG BLACK dial
during the hot water delivery will stop the flow
of hot water.
TIP
If the preset Long Black settings do not suit
your cup size or strength preferences, there
are 6 custom Long Black settings for you to
program. Once programmed, your custom
setting will appear after the 3 preset settings.
Refer to 'Long Black Adjust - Programming
Custom Settings’, page 20.
MANUAL LONG BLACK
This allows you total control over the Long
Black process: pre-infusion duration, espresso
volume and hot water volume.
During manual Long Black mode, the LCD will
show a moving cup icon.
Press and hold LONG BLACK dial to activate
pre-infusion. Release LONG BLACK dial to
commence espresso pour.
Press the LONG BLACK dial to stop espresso
pour and commence hot water pour.
Press the LONG BLACK dial again to stop the
pour of hot water.
TIP
You can conduct a manual Long Black
extraction each time, or program this as a
custom setting. Once programmed, your
custom setting will appear after the 3
preset settings. Refer to 'long Black Adjust -
Programming Custom Settings’, page 20.
HOT WATER
The HOT WATER button can be used to pre-
heat cups or add hot water manually.
To stop and start the pour of hot water, press
the HOT WATER button.
To ensure water is dispensed at the correct
temperature, hot water will cease to dispense
after approx. 90 seconds. Depending on the
size of your cup, you may need to press the
HOT WATER button a second time.
HOT WATER
NOTE
You cannot run hot water and extract espresso
at the same time.