Instruction Manual

18
DYNAMIC POWER ADJUSTMENT
To suit your personal preference, adjustment of
both time and power is available when using
the microwave in manual setting.
An example of dynamic power adjustment can
be seen below in the SMART COOK mode.
Please note that the dynamic power
adjustment can only be used with settings
that are not using Sensor IQ. Dynamic power
adjustment also cannot be used on Smart
Defrost setting.
Press SMART COOK button to enter SMART
COOK settings, the microwave will beep once.
Turn TIME/FOOD TYPE dial to select food
type.
START
Instant +30
TIME
Food Type
As the TIME/FOOD TYPE dial is turned the
arrow shifts and points to what food type is
selected. In this case OATMEAL is selected.
Once you have chosen FOOD TYPE, turn
the POWER/AMOUNT dial to adjust quantity
or weight.
STOP
CLEAR
POWER
Amount
Press START to begin cooking.
Using the POWER/AMOUNT dial the power
level can be increased or decreased at any time
during the cooking cycle.
STOP
CLEAR
POWER
Amount
NOTE
Adjusting the power level while heating does
not affect the time.
+30 SEC INSTANT START
Press START/Instant +30 button to begin
cooking instantly for 30 seconds with 100%
microwave power. Each additional press will
increase the cooking time by 30 seconds.
WHEN COOKING IS FINISHED
At the end of any cooking cycle, the microwave
will play the designed cycle finish tone, and the
word End will flash on the screen.
The word End will stay flashing on the screen
for 5 minutes or until the door is opened.