the Smart Oven™ Air Fryer Instruction Book – Suits all BOV860 models
Contents 2 6 8 10 Breville recommends safety first Components Before first use Functions – OPERATING YOUR BREVILLE OVEN – AUTO EJECT RACK 11 – GRILL 11 – TOAST 11 – CRUMPET 12 – BAKE 13 – PIZZA 15 – WARM 17 – AIR FRY 17 – SLOW COOK 18 – REPLACING THE OVEN LIGHT 19 21 Care & Cleaning 22 Troubleshooting 2 BREVILLE RECOMMENDS SAFETY FIRST At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind.
• Do not use on a cloth-covered surface, near curtains or other flammable materials. • A fire may occur if the oven is covered or touches flammable material, including curtains, draperies, walls, and the like, when in operation. • Do not use the appliance on (or close to) a hot gas or electric burner, or where it could touch a heated oven or surface. • Do not let the power cord hang over the edge of a table or counter, or touch hot surfaces.
• The use of accessories and attachments not recommended or supplied with this oven may cause injuries. • This appliance is for household use only. Do not use in any type of moving vehicles. Do not use the appliance outdoors, or for anything other than its intended use. Misuse can cause injury. • If the appliance is to be: left unattended, cleaned, moved, assembled or stored, always switch the unit off and unplug the cord from the power outlet and allow to cool completely.
SPECIFIC INSTRUCTIONS FOR BOV860 • Always unplug the oven and let all parts (including the bulb housing, glass cover and enclosure) cool completely before replacing bulb. • We recommend the oven is • Only use a 25 Watt, 220–240V, operated on a dedicated circuit G9 type oven bulb. separated from other appliances. • Always use a soft cloth when Consult a licensed and qualified handling the bulb and do not electrician if you are unsure.
Components A B F G H C D TEMP E Darkne J I A. B. C. D. E. F. 6 30 cm non-stick pizza pan Wire rack Grilling rack 28 x 33.5 cm enamel roasting pan Air fry basket Oven light G. H. I. J.
K FUNCTION START/CANCEL L O S P K. LCD screen L. FUNCTION dial M. TEMPERATURE dial/toast and crumpet darkness control N. TIME dial/toast and crumpet selection O. START/CANCEL button P. OVEN LIGHT button Q. CONVECTION button R. FROZEN button S.
Functions PREPARING THE OVEN Before first use, please run the oven empty for 20 minutes to remove protective substances from the heating elements. Ensure the area is well ventilated as the oven may emit vapours. These vapours are safe and are not detrimental to the performance of the oven. 1. Remove and safely discard any packing material, promotional labels and tape from the oven. 2. Remove the crumb tray, wire racks, grilling rack, roasting pan, air fry basket and pizza pan from the polyfoam packaging.
OVEN FUNCTIONS OVERVIEW FUNCTION SUGGESTED OPTIONAL RACK SETTINGS POSITION PRESETS PREHEAT RANGE GRILL Top HI 10 MINS No HI-MED-LO Up to 20 MINS TOAST Middle FROZEN Darkness 4 Slices 4 No Darkness 1-7 Slices 1-6 CRUMPET Top FROZEN Darkness 4 Slices 4 No Darkness 1-7 Slices 1-6 BAKE Bottom CONVECTION 160°C TEMPERATURE CONVECTION CONVERSION 30 MINS Yes 50°C–230°C Up to 2:00 HRS ROAST Bottom CONVECTION 175°C TEMPERATURE CONVECTION CONVERSION 1:00 HRS Yes 50°C–230°C Up to 2:00 HRS
TIME DIAL Functions ROTATE OPERATING YOUR BREVILLE OVEN 1. Position the wire rack so the spokes face upward and insert it into the desired rack position. The rack positions are conveniently printed on the oven door window. 2. Turn the FUNCTION dial until the indicator on the LCD screen reaches the desired setting. . 3. The top figure on the LCD screen indicates the preset cooking temperature for the selected setting. For the TOAST and CRUMPET settings it indicates the darkness level.
NOTE The cooking cycle can be stopped at any time by pressing the START/CANCEL button. This will cancel the cycle and the button backlight will illuminate blue. NOTE Press the CONVECTION button to choose between no convection, convection and super convection. Convection and super convection may adjust the temperature to compensate for the faster air flow. Super convection will deliver a crispier food result.
2. Position bread slices as close to the centre of the wire rack as possible for optimum toasting results. 3. Close the oven door. 4. Turn the FUNCTION dial until the indicator on the LCD screen reaches the TOAST function. The top figure on the LCD screen indicates the preset darkness setting ‘4’, while the bottom figure indicates the preset number of slices ‘4’. 7. The timer will be displayed and automatically begin to count down.
indicates the preset darkness setting ‘4’, while the bottom figure indicates the preset number of crumpets ‘4’. START/CANCEL START/CANCEL 8. At the end of the CRUMPET cycle, the oven alert will sound. The START/CANCEL button backlight will go out and the LCD screen will illuminate blue. NOTE 5. The darkness setting and number of crumpets can be adjusted before or during the toasting cycle. a) The darkness setting is indicated by the row of triangles at the top of the LCD screen.
START/CANCEL START/CANCEL 9. At the end of the BAKE cycle, the oven alert will sound. The START/CANCEL button backlight will go out and the LCD screen will illuminate blue. 4. The baking temperature, time and convection settings can be adjusted before or during the baking cycle. a) The baking temperature is displayed as the top figure on the LCD screen. Turn the TEMPERATURE dial to adjust the baking temperature from 50°C to a maximum of 230°C.
b) The roasting temperature is displayed as the top figure on the LCD screen. Turn the TIME dial to adjust the time up to 2 hours. 5. Press the START/CANCEL button to activate the ROAST function. The button backlight will illuminate red, the oven alert will sound and the LCD screen will illuminate orange. The LCD screen will indicate a blinking ‘PREHEATING’. 6. Once the oven has finished preheating, an alert will sound and food can be inserted into the oven. 7.
START/CANCEL 4. Turn the FUNCTION dial until the indicator on the LCD screen reaches the REHEAT function. The top figure on the LCD screen indicates the preset REHEAT temperature of 165°C while the bottom figure indicates the preset time of ‘:15 MINS’. The preset CONVECTION setting will also be displayed. 9. At the end of the PIZZA cycle, the oven alert will sound. The START/CANCEL button backlight will go out and the LCD screen will illuminate blue.
WARM FUNCTION The WARM function maintains hot foods at the recommended temperature to prevent bacterial growth, 70°C or above. 1. Insert the wire rack into a rack position that best suits the type of food you are keeping warm. 2. Place food, positioned on the included roasting pan, pizza pan or other oven-proof dish, on the centre of the wire rack so air will flow around all sides of the food. 3. Close the oven door. 4. Turn the FUNCTION dial until the indicator on the LCD screen reaches the WARM function.
b) The AIR FRY time is displayed as the bottom figure on the LCD screen. Turn the TIME dial to adjust the time up to a maximum of 2 hours. 5. Press the START/CANCEL button to activate the AIR FRY function. The button backlight will illuminate red, the oven alert will sound and the LCD screen will illuminate orange. The LCD screen will indicate a blinking ‘PREHEATING’. 6. Once the oven has finished preheating, an alert will sound and food can be inserted into the oven. 7.
7. After the PREHEATING alert has sounded, the timer will automatically begin to count down. The cycle can be stopped at any time by pressing the START/CANCEL button. 8. At the end of the SLOW COOK cycle, the oven will automatically switch to the WARM function. The LCD screen will display ‘KEEP WARM’ and a keep warm time of ‘2:00 HR/MIN’ will automatically count down. The keep warm cycle can be stopped at any time by pressing the START/CANCEL button.
REPLACING THE OVEN LIGHT WARNING Always unplug oven and let cool before replacing bulb. Only use a 25-Watt, 220-240V, G9 type oven bulb. 1. Remove the wire rack from the oven before replacing the light. 2. The light is positioned on the lefthand side of the oven cavity. Position your fingers on the outside of the light housing and gently pull the glass cover away from the oven wall to remove it.
Care & Cleaning Before cleaning, ensure the oven is turned off by removing the power plug from the power outlet. Allow the oven and all accessories to cool completely before disassembling and cleaning. Cleaning the outer body and door 1. Wipe the outer body with a soft, damp sponge. A non-abrasive liquid cleanser or mild spray solution may be used to avoid build-up of stains. Apply the cleanser to the sponge, not the oven surface, before cleaning. 2.
Troubleshooting POSSIBLE PROBLEM Oven will not switch “ON” The LCD display light has gone out EASY SOLUTION • • • • • • The pizza does not cook evenly The Magnetic Auto-Rack Eject comes out too far when I open the door I cannot select the FROZEN FOODS button Steam is coming out from the oven door The heating elements appear to be pulsing Water is dripping onto counter from under door The temperature reading on the LCD screen doesn't match the temperature measured inside the oven 22 • • • • • • • Chec
POSSIBLE PROBLEM The ‘preheat’ alert sounds at a lower temperature than what is displayed on the LCD screen The LCD screen displays 'E01' The LCD screen displays 'E02' The LCD screen displays 'E03' The LCD screen displays 'E05' Temperature are changing when convection button is pressed EASY SOLUTION • • • • • • • • The ‘preheat’ alert sounds at 75% of the target temperature. This provides the fastest, combined preheating and cooking time.
Breville Customer Service Centre Australian Customers New Zealand Customers Phone: 1300 139 798 Phone: 0800 273 845 Web: Web: www.breville.com www.breville.com Breville, the Breville Logo, Smart Oven and Element IQ are trademarks of Breville Pty Ltd (“Breville”) and Breville’s products are distributed in Australia and New Zealand under license. Copyright Breville Pty. Ltd. 2019.
