Instruction Manual

38
WARNING
• Do not use abrasive cleaners, steel wool or
scouring pads.
• Do not immerse metal base or power cord in
water or any other liquid as they may cause
electrocution.
• Ensure removable cooking bowl is correctly
positioned in the base before you commence
cooking.
NOTE
After cooking rice or large meals, some
cooking liquid may pool under lid at the top
of appliance around the cooking bowl. This
is normal. Use a paper towel or kitchen cloth
to clean after every use. Use a small brush or
cotton swab if necessary.
Call The Breville Customer Service Centre.
Phone: [phone] to order
a replacement.
NOTE
• Replace silicone rubber gasket every
1–2 years (see your nearest Breville
Service Centre).
• Wash gasket in warm, soapy water. Rinse with
clean water, dry thoroughly and place back in
their original position.
• The silicone rubber gasket can be washed
in the top rack of a dishwasher to eliminate
odour from spices.
• Can soak silicone rubber gasket in a mixture
of bicarbonate soda and water to help
eliminate odours before cleaning.
• During cleaning of the lid ensure safety
locking pin moves freely (up and down).
Wash and clean any oil or food residue from
this area.
WARNING
If the silicone rubber gasket is not fitted
correctly into the holder, the lid will not seal
properly. This may cause the appliance to
malfunction and leak steam or hot liquid which
can cause burns or scalding.
b) Wash the inside of the lid with a wet,
soapy sponge or cloth. Use a brush to
remove oil residue if necessary.
Wipe dry with a clean, damp cloth.
c) Regularly inspect that Pressure Release
Valve Cover is clean and free of liquid/
food. Remove pressure release valve
cover from the lid (by twisting and
lifting up and off the Lid) and wipe over
with a soapy cloth and dry clean.
Rinse well and replace by clipping back
in place.