Instruction Manual

18
PAGE HEADER.....
OPERATING
CRUMPET/FRUIT BREAD BUTTON
The crumpet feature activates additional
heat to the middle heating elements to
perfectly toast the insides of your crumpet
without burning the outside.
To toast crumpets:
1. Place the crumpet into the toasting
slots with the inside of the crumpet
facing inwards as per the crumpet
markings above the middle heating
elements of the toaster.
2. Select the desired browning setting by
adjusting the browning control slide
on the front of the toaster. There are
12 browning settings ranging from
'1' (lightest) to '5' (darkest).
3. To select the CRUMPET setting, press
the CRUMPET button and the button
surround will illuminate white. To start
the toasting process, press down the
lever until it locks into place.
NOTE
It is normal for the outside heating
elements to appear off or on a lower
power during the Crumpet setting. This
ensures the inside of your crumpet
toasts without burning the outside.
4. After the cycle has finished, press
the CRUMPET button to deselect
the setting if toasting other types
of bread.
To toast fruit bread:
1. Place the fruit bread into the toasting
slots.
2. To select the FRUIT BREAD setting,
press the CRUMPET/FRUIT BREAD
button twice and the button will
illuminate blue.
3. Select the desired setting by adjusting
the BROWNING CONTROL slide on
the front of the toaster.
4. The browning settings range from
'1' (lightest) to '5' (darkest).
5. To start the toasting process, press
down the LIFT & LOOK lever until
it locks into place.
6. Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the fruit bread.
The CRUMPET/FRUIT BREAD button
surround will remain illuminated in
blue and should be pressed once to
cancel if a subsequent toasting function
other than fruit bread is required. The
CRUMPET/FRUIT BREAD button
surround will cease to illuminate after
30 seconds or when the appliance is
switched off at the power point.