Instruction Manual

7
OPERATING YOUR BREVILLE PRODUCT
OPERATING YOUR BREVILLE PRODUCT
Before first use, remove and safely discard any
packing material, promotional labels and tape
from the waffle maker.
1. Wipe the waffle maker cooking plates with
a damp sponge or cloth. Dry thoroughly
and close the lid.
2. Place the waffle maker on a flat, dry surface.
Ensure there is a minimum distance of
4" (10cm) of space on all sides of the waffle
maker. Do not place anything on top of the
waffle maker.
3. Unwind the power cord completely and
insert the power plug into a grounded
110/120V power outlet.
4. Turn the POWER|MENU dial clockwise
until the dial indicator reaches the desired
waffle type or choose the CUSTOM setting.
'HEATING' will be displayed on the LCD.
NOTE
When using the waffle maker for the
first time, you may notice a fine smoke
haze. This is caused by the initial heating
of some of the components and is not a
cause for concern.
5. Use the darkness control dial to adjust the
brownness of your waffle. There are 12
darkness settings ranging from LIGHT to
DARK. The waffle maker will adjust the
cooking time based on your selected waffle
color. When making your first waffle,
we suggest using default setting '6'.
6. Once the waffle maker has completed
preheating, an audible alert will sound and
the LCD will turn orange.
7. Open the lid. The LCD will turn blue
and 'Close lid to start' will appear. Fill the
provided dosing cup with batter, then pour
approximately ½ cup evenly on the center
of each waffle square. The batter should
cover the peaks of the waffle plate.
8. Close the lid but keep the locking latch
open. The LCD will turn orange and the
countdown timer will automatically start.
9. At the end of the cooking cycle, an audible
alert will sound and 'End' will appear on the
LCD. Open the lid and carefully remove
your waffles. Do not use metal utensils as
they can scratch the non-stick surface.
NOTE
If waffles are not removed immediately
after the cooking cycle has completed,
an audible alert will sound every
30 seconds.
10. To cook more waffles, repeat steps 7–9
above. If the countdown timer needs to be
reset, press the RESTART button.
NOTE
The cooking time may change on repeat
batches. This is Waffle IQ™ calculating
the cooking time depending on the
selected waffle type, darkness setting and
temperature of the cooking plates.
11. If you are not cooking any more waffles,
turn the POWER|MENU dial to the
OFF position.
A BIT MORE
‰
If your waffle color is too light, one press of
this button adds a little extra cooking time.
This feature can be selected before, during
or immediately after the cooking cycle has
finished. The additional cooking time is
proportional to the total cooking time of the
selected waffle type and darkness setting.