the Smart Air TM Connect Purifier Instruction Book - LAP308
Contents 2 6 7 8 8 9 11 12 14 Breville Recommends Safety First Components Control Panel Features Assembly Functions WI-FI Connectivity Care, Cleaning & Storage Troubleshooting BREVILLE RECOMMENDS SAFETY FIRST At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care and adhere to the following precautions. SPECIFICATIONS Filter Life Approx.
• Do not place the air purifier near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water. • Keep the power cord out of heavy traffic areas. To avoid fire hazard, never put the cord under rugs, near heat registers, radiator, stoves or heaters. • To protect against electrical hazards, do not immerse in water or other liquids. Do not use the air purifier in the immediate surroundings of a bath, a shower or a swimming pool.
hang over the edge of a bench or adjust any electrical or or table, touch hot surfaces or mechanical functions on this become knotted. unit. Doing so will void your warranty. Other than the filter, • To protect against electric the inside of the unit contains shock, do not immerse the no user serviceable parts. All power cord, power plug or servicing should be performed appliance in water or any by qualified personnel only.
cleaning should be performed at an authorised Breville Service Centre. • This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury. • The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances.
Components A B C D E F G H I A. B. C. D. E. F. 6 Air Outlet Control Panel Main Housing Body Air Quality Sensor Air Inlet Microbe Shield Light and Light Guard TM G. 3-Layer Filter H. Base Plate I.
Control Panel 2H 4H FILTER RESET LOW 8H TURBO MED HIGH C D IC R L SPEED D TIMER M B O B E S HIE AUTO A E A. Power On/Off B. Microbe Shield /Night Mode/Reset Filter C. Timer TM (up to 8 hours) D. Fan Speed (includes 4 speed modes; Low, Medium, High and Turbo) E.
Assembly Features YOUR BREVILLE AIR PURIFIER BEFORE FIRST USE Your Breville Smart Air Connect Purifier improves your indoor air quality using 4 distinct levels of protection. 1. A Pre-Filter Captures larger airborne particles such as human hair, pet dander and dust particles. 2. A True HEPA Filter Traps up to 99.97% of allergens and airborne contaminants down to 0.3 microns in size. These include lung-damaging dust, mould spores, plant spores, and pollen. 3.
Microbe Shield TM Functions • Press the Microbe Shield /NIGHT MODE/ RESET FILTER button until the Microbe Shield indicator light illuminates to turn Microbe Shield on. • To turn off the Microbe Shield during night mode, press the Microbe Shield /NIGHT MODE/RESET FILTER button again. Microbe Shield will turn off automatically, and the lights will remain dimmed. • To turn off night mode, press the Microbe Shield /NIGHT MODE/RESET FILTER button again. All lights should return to normal.
FAN SPEED/TURBO MODE NOTE The air purifier will resume in the last programmed setting once it has been turned off, even if turned off at the power outlet. If the last programmed setting was Night mode, once turned on, the control panel will illuminate with the Night indicator light blinking as a reminder that Night mode has been set. FAN SPEED button repeatedly • Press the until the desired speed is illuminated on the control panel. • There are 4 fan speeds: Low, Medium, High and Turbo.
Wi-Fi Connectivity The Breville Smart Air Connect Purifier can offer remote operation by using a home Wi-Fi connection and the Breville Home Connect™ app downloaded to a compatible mobile phone. through the Google Play store or Apple App store. To go straight to the appropriate app store, scan the QR code below. TM CONNECT YOU PURIFIER TO WI-FI 1. Ensure the mobile device is connected to a home Wi-Fi network. 2. To set up the purifier, turn the purifier on at the power outlet.
Care, Cleaning & Storage The air purifier and filter should be cleaned at least once every month. Ensure the air purifier is switched off and disconnected from the power outlet and allow all parts to cool before cleaning or storing. • Use a clean, dry cloth to clean all external surfaces of the air purifier. • Store the air purifier in an upright position. Do not store anything on top of the air purifier. NOTE More frequent cleaning may be required depending on environmental conditions.
REPLACING THE FILTER Your Smart Air Connect Purifier filter should be replaced in the time frames indicated below. • The filter life is approximately 6 months if used 24 hours daily, or 12 months if used 12 hours daily. • The filter life may vary to this timing depending on environmental conditions. • Remove all packaging from the replacement filter and place the filter into the unit as described below. 1. Carefully, turn your air purifier upside down and remove the locking knob from the base of the unit.
Troubleshooting MINI TROUBLESHOOTING GUIDE Before carrying out any of the following service checks, unplug the unit from the mains. PROBLEM Unit will not start. Insufficient air flow. Excessive noise. UV-C Light not illuminating 14 WHAT TO DO • Check that the power plug is connected to a power outlet and the outlet is turned on. • Check that air purifier is assembled correctly. • Check that the filter is fitted correctly in place. • Check that the filters are clean.
NOTE 15
Breville Customer Service Centre Australian Customers New Zealand Customers Phone: 1300 139 798 Phone: 0800 273 845 Web: Web: www.breville.com www.breville.com Breville, the Breville logo, Master Every Moment, Smart Air, SensAir, Breville Home Connect and the Microbe Shield logo are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928. Copyright Breville Pty. Ltd. 2020.