Instruction Manual

11
o
Operation
OPERATING YOUR BREVILLE
AIR CIRCULATOR
1. Place the air circulator on a flat surface. Use
the Where to Position Your Air Circulator
section in this book for positioning
depending on requirements.
2. Insert the power plug into a 230V or 240V
power outlet and switch the power outlet on.
The LED display will illuminate to display
the current room temperature. The air
circulator is now in standby mode.
3. Touch the
button to turn the air
circulator on. The air circulator will
automatically start in NORMAL mode at
fan speed 1.
n
NOTE:
To return to standby mode at any time during
operation, touch the
button.
w
CAUTION:
Never insert fingers, pencils or any other
objects through the guards whenever the
power plug is connected, in particular while the
air circulator is switched on.
ROOM AMBIENT TEMPERATURE
Your Breville Air Circulator is fitted with a
temperature sensor that detects the room
temperature which will display through the
LED display. The figure displayed is only an
indication of the room temperature and will
vary depending on the location of the air
circulator in the room.
The LED display shows ambient temperature
only, or cycles to show the ambient
temperature and the setting depending on the
selected mode.