Instruction Manual

15
Wi-Fi
Connectivity
SET UP YOUR AIR CIRCULATOR
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. The air circulator must be on standby mode.
Once on standby, the
symbol will flash
fast on the display panel. The air circulator
is now ready to connect.
3. Log into your Breville Home Connect™ app
account and stay on the “Home” page. To
add the air circulator to the list, touch ‘Add
Device’ or the
symbol found in the top
right-hand corner of the screen. Follow the
prompts in the app.
4. If the connection is successful, the air
circulator will appear in the main page of
the app and the
symbol light on the air
circulator will illuminate.
5. If connection is unsuccessful, touch and
hold the
button for 5 seconds until the
symbol is flashing slowly. Follow the
prompts in the app to connect in a different
mode.
The AirDynamic 3D™ Connect air circulator
can offer remote operation by using a home
Wi-Fi connection and the Breville Home
Connect™ app downloaded to a compatible
mobile phone through the Google Play store or
Apple App store.
To go straight to the appropriate app store,
Scan the QR code below.
For instructions on how to use the app, scan
the QR code below, refer to the Quick Start
Guide that can be found in the box or go to:
tinyurl.com/HomeConnectQuickStart
n
NOTE
The Breville Home Connect™ app is compatible
with mobile phones running Android® 5.0 or
later and iOS devices 9.0 or later.
n
NOTE
To control the air circulator using the app, the
air circulator must be plugged in to an active
power outlet.