Instruction Manual

16
Voice
Assistants
The Breville AirDynamic 3D™ Connect comes with the added feature of voice assistance, allowing
you to control your air circulator using your voice by linking your Breville Home Connect™ app
with Amazon Alexa and Google Home/Assistant.
To link your Breville Home Connect™ app account with either Amazon Alexa or Google Home/
Assistant,, refer to the instructions on www.Breville.com or follow instructions found in the Breville
Home Connect™ app under Me > Third-Party Voice Services > View more ways to link.
IMPORTANT NOTE
The recommended voice commands to operate the appliance's functions differ between Amazon
Alexa and Google Home/Assistant as listed. Variations of these commands may also be
recognised, however, if a command fails, check against the recommended voice command.
NOTE
To control the air circulator using the Amazon Alexa or Google Home/Assistant app, the air
circulator must be plugged in to an active power outlet and on standby mode.
VOICE CONTROL WITH AMAZON ALEXA
Before you can voice control your Breville AirDynamic 3D™ Connect with Amazon Alexa, you
need to link the Breville Home Connect™ account to the Amazon Alexa app as per instructions.
Amazon Alexa Recommended Voice Commands for the Breville AirDynamic 3D™ Connect
Supported Settings Amazon Alexa Voice Commands
Power Turn on DEVICENAME
Turn off DEVICENAME
Mode Set DEVICENAME to normal
Set DEVICENAME to eco
n1 Set DEVICENAME to natural low
n2 Set DEVICENAME to natural medium
n3 Set DEVICENAME to natural high
Set DEVICENAME to turbo mode
Fan Speed Set DEVICENAME speed to one
Set DEVICENAME speed to two
Set DEVICENAME speed to three
Set DEVICENAME speed to four
Set DEVICENAME speed to five
Set DEVICENAME speed to six
Set DEVICENAME speed to seven
Set DEVICENAME speed to eight
Vertical Swing Turn on Vertical Swing on DEVICENAME
Turn off Vertical Swing on DEVICENAME
Horizontal Swing Turn on Horizontal Swing on DEVICENAME
Turn off Horizontal Swing on DEVICENAME